Who's FD is this....
08-09-01, 02:20 AM
#2
He-Bitch
Join Date: Feb 2001
Location: Long Island, NY
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
More importantly...who's nicely unpainted body kitted white and red Honda is that in the background!! TIIIIIIIGGGHHHTTT!!! Honestly, how could you drive your car without the bodykit painted, let alone take it to a car show.
08-09-01, 05:15 AM
#4
Senior Member
Join Date: Apr 2001
Location: Philadelphia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
That is my FD at MapleGrove race way on Sunday
I just had my car out of KD rotary after 6 months at KD and it only has 500 miles on the break in. Reasons the paint did not match because I told Dave at KD just paint it and do some fitment and shaving off to fits the FMIC. I didn't worried about the matching that is because I am going to paint the entire car anyway. Here are some specs of my car:
Greddy T-78 single turbo kits with full race ports engine
2mm longlife racing apex seals and springs
Greddy FMIC, Greddy elbow pipe and Greddy intercooler piping
850cc primary and 1600cc secondary
Weldon fuel pump
SX fuel pressure regulator
Apexi power FC with commander
Apexi AVCR and SAFC
Delfi boost, EGT, oil presssure, oil temp., fuel pressure, and Tach
Delfi replay unit
Apex'i GT-spec catback exhaust
Bonez midpipe and and downpipe
9.5 lbs flywheel
ACT street/strip clutch
Carbonfiber driveshaft
Kaaz differential
Full C-west bodykits waiting to be install with C-west carbon fiber
GT wing
SARD GT-spec coilovers imported from Japan
Cusco F&R strut tower bar
Blitz Technospeed Z-1 19x9 and 19x10 with Yokohama 235-35-19
275-30-19
KVR F&R cross-drilled rotors with pads
Greddy T-78 single turbo kits with full race ports engine
2mm longlife racing apex seals and springs
Greddy FMIC, Greddy elbow pipe and Greddy intercooler piping
850cc primary and 1600cc secondary
Weldon fuel pump
SX fuel pressure regulator
Apexi power FC with commander
Apexi AVCR and SAFC
Delfi boost, EGT, oil presssure, oil temp., fuel pressure, and Tach
Delfi replay unit
Apex'i GT-spec catback exhaust
Bonez midpipe and and downpipe
9.5 lbs flywheel
ACT street/strip clutch
Carbonfiber driveshaft
Kaaz differential
Full C-west bodykits waiting to be install with C-west carbon fiber
GT wing
SARD GT-spec coilovers imported from Japan
Cusco F&R strut tower bar
Blitz Technospeed Z-1 19x9 and 19x10 with Yokohama 235-35-19
275-30-19
KVR F&R cross-drilled rotors with pads
Trending Topics
08-09-01, 12:30 PM
#9
Full Member
Join Date: Apr 2001
Location: marietta, ga (soon 2B san diego)
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
overkill??? do you mean sleek light kits in general or because it doesn't look right w/out a body kit...
Last edited by bploz RX7; 08-09-01 at 12:33 PM.
08-09-01, 12:57 PM
#11
Junior Member
Join Date: Jul 2001
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
AA,
I was wondering if your rims rub in the front when you make sharp turns into driveways (e.g. 90 degree turn into a driveway)? Cuz I have an 18x8.5 and 9.5 (245-45-18's?? in the front, not w/ my rims right now) setup lowered w/ Racing Beat/Koni's and when I turn too sharply, the tires rub against the fenders pretty badly. So I'm curious if your 19" setup gives you probs. Thanks.
Andrew
I was wondering if your rims rub in the front when you make sharp turns into driveways (e.g. 90 degree turn into a driveway)? Cuz I have an 18x8.5 and 9.5 (245-45-18's?? in the front, not w/ my rims right now) setup lowered w/ Racing Beat/Koni's and when I turn too sharply, the tires rub against the fenders pretty badly. So I'm curious if your 19" setup gives you probs. Thanks.
Andrew
08-09-01, 01:08 PM
#12
Senior Member
Join Date: Apr 2001
Location: Philadelphia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Homiedru,
Dave at KD put on my wheels and tires and it works fine but Dave did do some modification to the fenders to make it fit. He told me that I could go with 245-35-19 in front. There is no rubbing when I do corners or a sharp turn.
i wish it was mine!
Nice
08-09-01, 03:26 PM
#15
Senior Member
Join Date: Feb 2001
Location: Carl Junction, MO
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nice
Originally posted by WhtRocket
Don't let anybody **** you AA, that's a great looking 7. Everyone's is a WIP and I don't want to race you,
Don't let anybody **** you AA, that's a great looking 7. Everyone's is a WIP and I don't want to race you,
09-24-01, 12:34 PM
#20
Senior Member
AA,
your car looks extremely like mine. great looking FD. i also have the c-west lkit on my car. if it weren't for the wheels, they would look almost identical. if I knew how to get a damn picture of my car on this forum, I would post it. i have 19's on the rear, and 18's on the front, i get a little rubbing on the inner front fenderwell, but it is only plastic......
if someone can explain to me how to put a pic on, i will. it seems that all the ones that i try to post are too large..
-louis
o'matic fo' ya
your car looks extremely like mine. great looking FD. i also have the c-west lkit on my car. if it weren't for the wheels, they would look almost identical. if I knew how to get a damn picture of my car on this forum, I would post it. i have 19's on the rear, and 18's on the front, i get a little rubbing on the inner front fenderwell, but it is only plastic......
if someone can explain to me how to put a pic on, i will. it seems that all the ones that i try to post are too large..
-louis
o'matic fo' ya
09-24-01, 01:13 PM
#21
Senior Member
AA,
your car looks extremely like mine. great looking FD. i also have the c-west lkit on my car. if it weren't for the wheels, they would look almost identical. if I knew how to get a damn picture of my car on this forum, I would post it. i have 19's on the rear, and 18's on the front, i get a little rubbing on the inner front fenderwell, but it is only plastic......
if someone can explain to me how to put a pic on, i will. it seems that all the ones that i try to post are too large..
-louis
o'matic fo' ya
your car looks extremely like mine. great looking FD. i also have the c-west lkit on my car. if it weren't for the wheels, they would look almost identical. if I knew how to get a damn picture of my car on this forum, I would post it. i have 19's on the rear, and 18's on the front, i get a little rubbing on the inner front fenderwell, but it is only plastic......
if someone can explain to me how to put a pic on, i will. it seems that all the ones that i try to post are too large..
-louis
o'matic fo' ya
09-24-01, 01:55 PM
#22
Senior Member
Join Date: Apr 2001
Location: Philadelphia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Thanks;
Well it is relatively easy here is what you do go to www.z32.org under multimedia and click on uploader and upload you pics there then come back to the forum and right click copy and paste on the body of the message this how I post my pics maybe there are other ways but this is how I do it. When you post a new topic way at the bottom under forum rules click on [img] and it will show you how to post an image.
09-24-01, 01:58 PM
#23
Senior Member
Join Date: Apr 2001
Location: Philadelphia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Thanks;
Well it is relatively easy here is what you do go to www.z32.org under multimedia and click on uploader and upload you pics there then come back to the forum and right click copy and paste on the body of the message this how I post my pics maybe there are other ways but this is how I do it. When you post a new topic way at the bottom under forum rules click on "youmay edit your posts" and it will show you how to post an image.
09-25-01, 10:37 AM
#25
Senior Member
Join Date: Apr 2001
Location: Philadelphia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
I got it for $1475 for the "3ROW" FMIC you can also get for a cheaper price of $1299 for "2ROW" FMIC note these two is made for single turbo. You can get them at www.rx7store.net.