3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

whoa! Please help!!!

Thread Tools
 
Search this Thread
 
Old 08-24-02, 07:48 PM
  #1  
Senior Member

Thread Starter
 
JUSTgotMINE's Avatar
 
Join Date: Aug 2002
Location: raleigh, nc
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
whoa! Please help!!!

OK I was driving today to a friends house and she was driving great! I got back into the car about a half hour later and I can't get above 2800rpms. It Spits and sputters as thought the turbos are trying to spool up, but it won't go. I can't get above 40 mph...and that's going downhill. It's not overheating and The engine and turbos have under 20k on them. Did I lose a hose connection somewhere maybe? Please help!!!
Old 08-24-02, 08:21 PM
  #2  
Rotary Enthusiast

 
RX7Elmo's Avatar
 
Join Date: Jul 2002
Location: CA
Posts: 896
Likes: 0
Received 0 Likes on 0 Posts
check the hose that goes to the map sensor. The map sensor is on teh firewall near the driver side. I hope that is it.

Danny
Old 08-24-02, 09:02 PM
  #3  
Full Member

 
Lotan's Avatar
 
Join Date: Aug 2002
Location: Houston
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb

may also want to look at your fuel filter... a friends gas tank was so rusty that he had to change the filter weekly. The rust cut off the fuel flow and he had a similar studering. Hope this helps
Old 08-25-02, 10:09 AM
  #4  
Senior Member

Thread Starter
 
JUSTgotMINE's Avatar
 
Join Date: Aug 2002
Location: raleigh, nc
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
...
Old 08-25-02, 11:04 AM
  #5  
Senior Member

Thread Starter
 
JUSTgotMINE's Avatar
 
Join Date: Aug 2002
Location: raleigh, nc
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
I forgot to mention that I just had it at the mazda dealership to get 2 of the 3 recalls done that had never been taken care of. Would anything they did with the recalls cause this problem?
Old 08-25-02, 12:35 PM
  #6  
Senior Member

Thread Starter
 
JUSTgotMINE's Avatar
 
Join Date: Aug 2002
Location: raleigh, nc
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
I didn't see any disconnected hoses. I started her up, but as soon as I giver her any gas, she coughs and stalls out. Has anyone else had this problem?
Old 08-25-02, 12:46 PM
  #7  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
If it only happens at around 2800 rpm, check out your double throttle solenoid or fuel pump relay.
Old 08-25-02, 09:59 PM
  #8  
Senior Member

Thread Starter
 
JUSTgotMINE's Avatar
 
Join Date: Aug 2002
Location: raleigh, nc
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
I'm not used to FD's. I have worked on my jeep quite a bit, but I'm new to this car. I'm going to print out a manual tomorrow from:

http://www.iluvmyrx7.com/3rd_gen_manuals.htm

Can anyone point me to some pages to reference?
Old 08-25-02, 10:01 PM
  #9  
Hamado things my way!

 
P'cola FD's Avatar
 
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes on 0 Posts
Miss Cleo predicts that section F will become your new friend.
Old 08-25-02, 10:26 PM
  #10  
Rotary Freak

 
paw140's Avatar
 
Join Date: Dec 2001
Location: Hattiesburg, MS
Posts: 1,668
Likes: 0
Received 0 Likes on 0 Posts
Does your check engine light come on? Check the codes anyway, that may point you in a general direction. To me it sounds like you're in limp mode. I'm having a similar problem right now... see https://www.rx7club.com/forum/showth...hreadid=108684

for a description of my problem. I'm thinking its a bad OMP connection.
Old 08-25-02, 11:00 PM
  #11  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
Originally posted by P'cola FD
Miss Cleo predicts that section F will become your new friend.
lol, there are other sections besides F?
Old 04-01-04, 10:46 AM
  #12  
Full Member

 
360spinner's Avatar
 
Join Date: Apr 2003
Location: Westchester New York (Cortlandt Mannor)
Posts: 121
Received 0 Likes on 0 Posts
double check and tripple check Boost Sensor on both ends, then reboot the comp by disconnecting the neg battery terminal and step on the brakes for 10-20 secs connect the terminal and then see if the prob persists. If so check codes, then replace fuel filter, if that does not work clean injectors if that was the problem replace injectors. BTW it could also be a faulty silonoid that the comp might not pick up anyway let me know how you turned out!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DASUPACAT1
RX-7 Audio/Visual Lounge
6
06-09-07 04:30 PM
tsmysak1
3rd Generation Specific (1993-2002)
13
07-11-06 10:08 AM



Quick Reply: whoa! Please help!!!



All times are GMT -5. The time now is 07:01 AM.