I think I know where everything goes except for this plug in here.

Where does it go? Someone please help asap! I want to get this done asap!

Thanks in advance!

-Jeff

 

BTW I'minstalling the WISESPORTS HID Kit at the moment.

 

That looks like the female end of the h4 blub. AKA that looks like it should go INTO the light bulb itself?

Its 3 flat female connections right? All 90 degrees of each other?

 

thats the female end of the bulb, you should have a male plug that plugs into it, that male plug should be wired to your lights so it knows when to turn on and off. Thats how it was with my rotary run racing lights which are h4s.

 

you plug that $hit into the harness you pulled off from your stock headlight bulbs.
that will be your power source or signal if using an additional relay

 

I'll find out. Is there only one female? Because, that's all I have haha! I guess the HID system only needs to be pluged into the female stock harness in one side since all the ballasters are on the same wiring. Thanks guys. I really appreciate the advice. I don't know why I didn't think about that.

-Jeff

 

OKAY! HIDs Work! I just need to cut the housing now! So far it took me about an hour and 30 minutes to get everything wired up and working. Not bad for a first time. Now on to the hard part!

-Jeff

 

Please post pics when you get it figured out, i'm interested in seeing these.


Good luck, and thanks!

 

If that's a female plug, I need to see my doctor...