where does it go?
#1
Full Member
Thread Starter
Join Date: Mar 2005
Location: North Fort Myers Fl
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
where does it go?
Where does the knock sensor wire plug into?? i have been going through my car and have found that my knock sensor has been unpluged since the day i bought it.. So now i have no clue where it plugs in and the wire is just sitting on top of the power steering... I checked the FSM but it just show the sensor and not where it plugs in also checked forum but it shows same thing..Any help would be greatly appreciated..
#3
Full Member
Thread Starter
Join Date: Mar 2005
Location: North Fort Myers Fl
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Thank you
Originally Posted by Mahjik
It plugs into the main harness. It should be located behind the alternator by/under the Purge Control Solenoid.
Thank you very much mahjik now maybe i can start my car tommaorw after final check.
#4
Full Member
Thread Starter
Join Date: Mar 2005
Location: North Fort Myers Fl
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Should i???
Ok soo i have found a brown wire that has been cut..Im guessing this is the wire that is for the knock sensor,it's right behind the alt like MAHJIK said it would be .. So running off of this info would it be ok to just hook it back up wihtout the connector or do i need it?
#5
Racing Rotary Since 1983
iTrader: (6)
according to the 94 shop manual the knock sensor hooks into a white shielded wire. the connector is for one wire and has 3 ears on it. my 93 also had a white wire BTW.
good luck,
howard coleman
good luck,
howard coleman