RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   where does it go? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/where-does-go-574978/)

sydewayz7 09-04-06 01:53 PM

where does it go?
 
Where does the knock sensor wire plug into?? i have been going through my car and have found that my knock sensor has been unpluged since the day i bought it.. So now i have no clue where it plugs in and the wire is just sitting on top of the power steering... I checked the FSM but it just show the sensor and not where it plugs in also checked forum but it shows same thing..Any help would be greatly appreciated..

Mahjik 09-04-06 03:09 PM

It plugs into the main harness. It should be located behind the alternator by/under the Purge Control Solenoid.

sydewayz7 09-04-06 09:39 PM

Thank you
 

Originally Posted by Mahjik
It plugs into the main harness. It should be located behind the alternator by/under the Purge Control Solenoid.


Thank you very much mahjik now maybe i can start my car tommaorw after final check.

sydewayz7 09-05-06 10:52 PM

Should i???
 
Ok soo i have found a brown wire that has been cut..Im guessing this is the wire that is for the knock sensor,it's right behind the alt like MAHJIK said it would be .. So running off of this info would it be ok to just hook it back up wihtout the connector or do i need it?

Howard Coleman 09-06-06 07:16 AM

according to the 94 shop manual the knock sensor hooks into a white shielded wire. the connector is for one wire and has 3 ears on it. my 93 also had a white wire BTW.

good luck,

howard coleman


All times are GMT -5. The time now is 01:11 AM.


© 2024 MH Sub I, LLC dba Internet Brands