where do i put jackstands?
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: new orleans la
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
where do i put jackstands?
hey as you can tell i am not too familiar with the undercarriage of the rx7, and was wondering where is the best place to place jackstands?? jeff
#3
Ex fd *****
Originally posted by GsrSol
On the tow hooks if you're jacking up the front. Thats what I do.
On the tow hooks if you're jacking up the front. Thats what I do.
Put them on the jacking points directly behind the front wheels and in front of the rear wheels - check your owners manual - jack the car with a floor jack under the front subframe or under the diff, again check the owners manual or the Fact. Service Manual - they are available on line I believe.
#4
Front frame rails, and right behind the front ball joint on the trailing arms in the rear. This seems to be the safest, most stable position. You can also use the rear lower control arm mounts on the rear x brace, just inside the joint.
Jason.
Jason.
Thread
Thread Starter
Forum
Replies
Last Post
FührerTüner
2nd Generation Specific (1986-1992)
5
09-20-15 01:07 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM