Where Can I get Black Carpet for FD3??
02-06-06, 07:16 AM
#5
Senior Member
iTrader: (1)
Join Date: Jan 2006
Location: rocky mount,nc
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
My dealer can get me in new for $1288. Anyone got the inside # to an aftermarket carpet manufacturer? Maybe if we bombard them with calls they'll stamp out an aftermarket piece.
mike
mike
02-06-06, 10:52 AM
#7
Eats, Sleeps, Dreams Rotary
Originally Posted by willub and company
i have black bose with the wave for sale
I think he means the interior carpet not the hatch.
The cheapest place I have seen to get the carpet is through Mazdacomp, but you need to be a registered racer with them. Only takes two autox events.
Trending Topics
02-06-06, 03:01 PM
#9
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
https://www.rx7club.com/showthread.p...ghlight=carpet
Gordon had more threads about it....just search for "carpet" under "gmonsen" in both the interior and 3rd gen forums.
Gordon had more threads about it....just search for "carpet" under "gmonsen" in both the interior and 3rd gen forums.
02-06-06, 09:10 PM
#11
Full Member
Join Date: Dec 2005
Location: clermont, georgia
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Heard it was a real pain to get the carpet out, like you had to remove the dash or something, is that true? I'd love to replace my brown carpet with black, but if I have to take the whole car apart may be less inclined. if we could get a group buy together and get the cost to $350 or so I'd go for it. I figure they must need a floor pan to mold it, right? maybe someone with a trashed body shell would sell the pan (cheap?)to the carpet manufacturer, then they'd have no excuse!
t
t
02-06-06, 11:21 PM
#13
Eats, Sleeps, Dreams Rotary
Originally Posted by rx7what
you also have to take out a whole buch of the stuff under the dash. Like the heater core and air box.
Taking the dash out makes it tons easier. Plus it isn't that hard to do. Just seems intimidating at first. Also, you DON'T have to take the heater core or fan assembly out. Do a search. There is a step by step write up.
02-07-06, 02:41 AM
#14
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: OC
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone have the factory manual on the RX7. I want to figure out how to remove all my tan trim and convert it to black. I bought a ton of black interior pieces and now I just need to figure out how to remove everything.
02-07-06, 03:28 AM
#15
Full Member
Join Date: Dec 2004
Location: Orem, UT
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
On the thread that Rynberg posted there is a number for the shop that did gmonsen's carpet. Would anyone else be interested in perhaps doing a group buy? I imagine they kept their patterns...most shops do. I'm interested in this shop because it's already established that they do quality work.
I'll also be checking around locally in a few months after my paint is done. It'll be plenty easy for me since my interior is almost completely ripped out right now.
I'll also be checking around locally in a few months after my paint is done. It'll be plenty easy for me since my interior is almost completely ripped out right now.
02-07-06, 09:09 AM
#16
Originally Posted by Corusco
Would anyone else be interested in perhaps doing a group buy?
I would but what kinda price are we looking at for the GB and will it have all the foam padding like the stock carpet does to mold to the floor like the stock carpet does
I already have my interior all ripped out and black carpet is the only thing kepping me from putting it back together I already changed everything else over to black from tan I just need that damn carpet lol
02-09-06, 10:39 AM
#18
Senior Member
iTrader: (1)
Join Date: Jan 2006
Location: rocky mount,nc
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
OK I contacted ACC a minute ago & someone beat me to it. Fess up who are you? Roger left you a voice mail. Answer him quick. Looks like its do-able. For starters they will need a car to make the mold from. I left Roger w/ACC a voice mail. We need to band together on this one. This could be a VERY large group buy I would suspect.
mike
mike
Last edited by darksideperformance; 02-09-06 at 10:45 AM.
02-09-06, 11:50 AM
#20
Darkside FD
Join Date: Jan 2004
Location: AZ
Posts: 1,175
Likes: 0
Received 0 Likes
on
0 Posts
I would be very interested too....keep this thread updated.
After I get my carpet out I am going to go around locally and see how much the local interior shops want to duplicate mine in black.
After I get my carpet out I am going to go around locally and see how much the local interior shops want to duplicate mine in black.
02-10-06, 07:30 AM
#24
Senior Member
iTrader: (1)
Join Date: Jan 2006
Location: rocky mount,nc
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
list start
It looks like they have carpet for the first gen. for $197.17. None listed for the 2nd or 3rd gen.
iforged is right lets make a list.
Darksideperformance/1993/black or red (depends on ability to match interior color)
send me a pm and I'll add you, unless someone else really wants to handle this I'll add it to my to do list
If they don't have one for the 2nd, I'll work on that one also. I'm going to call them again today. Again, ACC told me that someone had already called about this. If this person wants to take over here then pm me & I'll hand it over, but I need carpet so I'm pursuing this with a vengence.
mike
iforged is right lets make a list.
Darksideperformance/1993/black or red (depends on ability to match interior color)
send me a pm and I'll add you, unless someone else really wants to handle this I'll add it to my to do list
If they don't have one for the 2nd, I'll work on that one also. I'm going to call them again today. Again, ACC told me that someone had already called about this. If this person wants to take over here then pm me & I'll hand it over, but I need carpet so I'm pursuing this with a vengence.
mike
Last edited by darksideperformance; 02-10-06 at 07:39 AM. Reason: forgot something
02-10-06, 08:12 AM
#25
There and back again
Join Date: Feb 2001
Location: Camarillo, Ca
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Did anyone ask what the minimum buy-in is? I don't think they are going to make the mold (see image) for anything less than 100 units. I could be wrong, but the molds look like a big investment on their end.
