3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

whats the best oil for a 7

Thread Tools
 
Search this Thread
 
Old Jul 14, 2007 | 11:04 AM
  #1  
fd3sbeantown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2006
Posts: 40
Likes: 0
From: boston
whats the best oil for a 7

so i am due for an oil change and i was wondering what kind of oil do you guys use in the 7? and the worst oil u ever put in the 7.
Old Jul 14, 2007 | 11:05 AM
  #2  
XxMerlinxX's Avatar
Team Benjos Captain
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Aug 2005
Posts: 2,720
Likes: 1
From: Greenwood/Hartsville, SC.
Ibtr
Old Jul 14, 2007 | 11:17 AM
  #3  
PureMdMa's Avatar
1 of 203 94 White PEP's
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Sep 2001
Posts: 1,844
Likes: 0
From: Suwanee, GA
Wow this has been gone over thousands of times. You might wanna try a search but I use Valvoline VR1 20w50 with good results. I prefer not to use synthetic
Old Jul 14, 2007 | 11:21 AM
  #4  
R-R-Rx7's Avatar
Rotor or no motor
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (24)
 
Joined: Oct 2006
Posts: 3,741
Likes: 498
From: Limassol, CYPRUS
idemitsu full synthetic 10w30 .

The best by far
Old Jul 14, 2007 | 12:26 PM
  #5  
yuichiror's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 2,506
Likes: 0
From: Hampton, Va
From the FAQ: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/faq-3rd-gen-other-useful-links-68640/

33) What oil should I use?

First, there is the synthetic vs. dino debate. There is no consensus to this issue. Some experts recommend synthetic, others insist on regular oil. Early on, synthetic oil did not burn well in the combustion chamber - but this is not an issue with modern synthetics. What matters is that it gets changed on schedule – every 3000 miles or less. Some owners choose to change at 1500 miles to offset the fact that the oil cooler(s) is not drained during an oil change. The proper weight is 20w-50 in warm climates and 10w-30 in any place that gets cold in winter.

Most FD owners run from 10w-30 to a 20w-50. It depends on whether the car will experience use in cold winter conditions, or extended track conditions. In either case, the thicker 20w-50 is usually ok since fuel dilution will occur and thin the oil. Very thin oils (0w-40) used in some newer cars are not a good choice.
If you search, there's plenty of "oil debates".
Old Jul 14, 2007 | 05:17 PM
  #6  
fd3sbeantown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2006
Posts: 40
Likes: 0
From: boston
well yea i just bought Castrol 10w 30 since i was in a hurry to change my oil.
Old Jul 14, 2007 | 06:06 PM
  #7  
1QWIK7's Avatar
White chicks > *
Tenured Member: 20 Years
iTrader: (33)
 
Joined: Jul 2003
Posts: 13,146
Likes: 1
From: Secaucus, New Jersey
Q's sythetic blend (high rpm) 10w-30 for me.
Old Jul 14, 2007 | 06:09 PM
  #8  
MADDSLOW's Avatar
17 second FD
Tenured Member 15 Years
iTrader: (11)
 
Joined: May 2006
Posts: 2,436
Likes: 1
From: Poughkeepsie, New York
Originally Posted by fd3sbeantown
well yea i just bought Castrol 10w 30 since i was in a hurry to change my oil.
I use Castrol GTX 20w-50
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
13
Jan 9, 2018 11:19 AM
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 06:07 PM.