demahfahbun106

ok well heres the deal..what do you guys think of a 13bre motor swap in a t2 body s4 or s5..i ask thi squestion because am planning on going through with this swap as soon as i sell a few more of my fc items..well over the next 4-5 months i will be getting this motor rebuilt and street ported and just basically use thi stime to get everything i need for the swap...well my real question is..in all honesty what do you guys beleive that this car should run or have in hp....i know its a newbie question and NO you guys are not calculators lol..i just want to have a nice idea of what i should expect... well heres the mods so far

fully rebuilt/ported 13b-re in T2
apexi gt spec intercooler 2 1/2 inch ic piping
stock twins (for now)
haltech e6k
3inch exhaust from twins
850's cc and maybe 1600's
walbro or denso 255 lph

anyone think i should have different mods for better performance just let me know..thanks and again sorry for the newbie question but whatever responses i get from here will make me "make" up my mind on what to do with this motor...thanks again

p.s. i first posted this in the 2nd gen section and was told to post it here because the only 2nd part i was using was the shell...lol sorry

Mahjik

iTrader: (1)

About the most we have seen from the stock twin turbos was a little over 400rwhp. Having said that, on the stock twins, most people end up around 340-360rwhp on high boost.

demahfahbun106

well thanks but i was hoping to hear a little more hp than that, but then again it is on stock twins....well with that being said what times do you think should be expected with this set up???any tips? advice?? anyone thinks i should go a different way on mods? let me know thanks

Mahjik

iTrader: (1)

Check the Timeslip thread:

https://www.rx7club.com/time-slips-dyno-121/time-slips-229715/

You can see what people got with various setups in the FD. I don't know how that will translate to a 13B-REW converted FC, but it will give you an idea at least.

demahfahbun106

thaks for the thread but i'm puttin a 13b-re motor from the cosmo in my fc

Mahjik

iTrader: (1)

Oh, then your numbers will most likely be lower. I'm not sure why you were asking here then. IIRC, we only have one member using a cosmo 2-rotor. Its extremely rare with the 3rd Gen guys that anyone would go to the trouble to fit one in the car.

demahfahbun106

hey man nevermind my questions lol....my thread states why i posted here and it also states what car i'm putting it in...all i wanted to hear were youguys thoughts on it...but i guess i'll just wait and find out hands on