what would make your primaries not fire when starting?
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Where Uncle Sam sends me
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
what would make your primaries not fire when starting?
Besides wiring and the EGI fuse; what would make the primaries not fire while starting?
I have spark and till now I was flooding the car. (Did the unflooding procedures... many times.)
Now I do not think the primaries are delivering fuel because motor turns but when I pull plugs they do not smell like fuel nor does the exhaust.
T.W.
I have spark and till now I was flooding the car. (Did the unflooding procedures... many times.)
Now I do not think the primaries are delivering fuel because motor turns but when I pull plugs they do not smell like fuel nor does the exhaust.
T.W.
#6
Full Member
Thread Starter
Join Date: Feb 2002
Location: Where Uncle Sam sends me
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
.
Originally posted by paw140
Crank position sensor?
Crank position sensor?
Originally posted by ISUposs
is your fuel pump running?
is your fuel pump running?
Originally posted by evot23
Faulty FPR solenoid?
Faulty FPR solenoid?
Originally posted by SpiritR
So is the car running or not? or are you just messing with stuff to see if you can make it break?
So is the car running or not? or are you just messing with stuff to see if you can make it break?
A little more background https://www.rx7club.com/forum/showth...art+kinda+long
T.W.
Trending Topics
#8
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
Maybe disconnect the fuel line to the primany rail and see if there is fuel in it. If so then the rail is getting fuel but the injectors might be bad/cloged/ect. Or there could be an electrical problem with the connectors that fire the injectors.
STEPHEN
STEPHEN
#10
Full Member
Thread Starter
Join Date: Feb 2002
Location: Where Uncle Sam sends me
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SpiritR
I got a resume cool!
Anyway, in saying it tries to start, does it go vrooom-blah? Or just sits there and cranks and vum vum vum vum vum and thats it?
I got a resume cool!
Anyway, in saying it tries to start, does it go vrooom-blah? Or just sits there and cranks and vum vum vum vum vum and thats it?
Earlier the car would fire more like... cough..cough.. cough (pretty repeatitive) with some smoke. Now it just spins with starter and has spark;
Spray some starting fluid and more cough cough cough some smoke till it burns all the fluid and then just spins.
T.W.
#11
Senior Member
Join Date: Nov 2002
Location: out there
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
How about pressing on the gas pedal when starting? nothing?
How about the EGI relay? I noticed you did say besides this, does that mean you changed it?
It is an interesting problem.....
Any possible way you can get a compression tester, its worth looking into, or just borrow it and start troubleshooting.
How about the EGI relay? I noticed you did say besides this, does that mean you changed it?
It is an interesting problem.....
Any possible way you can get a compression tester, its worth looking into, or just borrow it and start troubleshooting.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
zuesskroph
2nd Generation Specific (1986-1992)
0
08-13-15 06:05 PM