well, my car recently got dyno tuned at 375 rwhp at 14 psi and im going to the racing track in a few weeks... lets say i can launch at 2.2-2.0 60 foot times, what 1/4 mile times can i accept if everything goes well??

also, is there a estimate rwhp to 1/4 mile time chart??? it seems straight foreward but if there is one, please show me the link or post it.

Thanks!!

 

http://www.ultimateresourceguides.com/content/

Try google for more/diffrent calculators.

-Alex

 

There is a calculator at www.rx7.com im guessing you will run mid 12's

 

high 11's

 

times depend more on the driver than the car....

 

what turbo?
ifirst time....i say mid 12s. however the car is capable of low mid 11s.

 

I think he is running a Blitz KKK-27

You should be mid-low 12's, dipping into 11 second territory if you are a good driver.

 

its not my first time at the track... i have gone quiet a few times but its harder to launch (well, not harder but different) a car that has stock twins and a car with a single turbo...


my guess was also 11's if a good driver... im going in a few weeks and ill see what happens!
Thanks!

 

Baaaaah.....14.2 final!!!

Hey call me when you go, I am definetly in.

 

ok, so im in, your in mike, gazo is in, we got 4 there... and im sure the guy's from the tune will be in.... lets go in a week or two!

 

with drag radials i would say high to mid 11s. With street tires, mid 12s. With ET streets definately mid 11s. All of course assuming you can drive.

 

After I dynoed 350 on low boost (12 psi) Chris Ott over at RP (rx7.com) told me had run a high 11 with the same dyno #s on slicks. Of course, Chris is a great driver, but that goes to show that an FD with 350 rwhp can be/is potentially an 11 second car.

 

We need to all chip in and get a set of "Community" slicks.