What up with the posted factory weigths?
#1
Full Member
Thread Starter
Join Date: Dec 2001
Location: Greenville, OH
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
What up with the posted factory weigths?
I weighed my 93 r1 a few days ago with four gallons of gas some cd cases and miscs stuff it weighed in at 2673lbs but all the posted weigths
say an R1 should weigh about 2800 hundred pounds any explaintions or ideas maybe they had a full tank of gas but I don't think that would make up for the 126 pounds. Just thinking.
say an R1 should weigh about 2800 hundred pounds any explaintions or ideas maybe they had a full tank of gas but I don't think that would make up for the 126 pounds. Just thinking.
#3
Full Member
iTrader: (2)
( i posted this early )
I had my 94 base corner - weighted for a track event.
1994 base (no sun roof)
no spare tire
16 gal of gas
150 lb driver
car weght (w/driver; 16gal of gas) @ 2961 lbs
-150 lbs (for driver)
2811 lbs
-108 lbs ( 1 gal gas = 6.8 lbs )
2703 lbs (no driver, no gas)
I had my 94 base corner - weighted for a track event.
1994 base (no sun roof)
no spare tire
16 gal of gas
150 lb driver
car weght (w/driver; 16gal of gas) @ 2961 lbs
-150 lbs (for driver)
2811 lbs
-108 lbs ( 1 gal gas = 6.8 lbs )
2703 lbs (no driver, no gas)
#5
Constant threat
The "sticker"?
As in the GVW (Gross Vehicle Weight) sticker in the door?
If so....that means nothing in the real world.
Look at your title, it will tell you, but more than anything else, look at the magazines, listen to those of us that have weighed our cars.
My FD weighs 2890 with a full tank of gas, and it is an automatic, base model.
As in the GVW (Gross Vehicle Weight) sticker in the door?
If so....that means nothing in the real world.
Look at your title, it will tell you, but more than anything else, look at the magazines, listen to those of us that have weighed our cars.
My FD weighs 2890 with a full tank of gas, and it is an automatic, base model.
#6
Re: What up with the posted factory weigths?
Originally posted by Crash
I weighed my 93 r1 a few days ago with four gallons of gas some cd cases and miscs stuff it weighed in at 2673lbs but all the posted weigths
say an R1 should weigh about 2800 hundred pounds any explaintions or ideas maybe they had a full tank of gas but I don't think that would make up for the 126 pounds. Just thinking.
I weighed my 93 r1 a few days ago with four gallons of gas some cd cases and miscs stuff it weighed in at 2673lbs but all the posted weigths
say an R1 should weigh about 2800 hundred pounds any explaintions or ideas maybe they had a full tank of gas but I don't think that would make up for the 126 pounds. Just thinking.
I weighed my stock base model with 3/8 tank of gas and it was 2780. This was at a recycling center that paid people based on the difference in vehicle weight on the way in and out. I don't know how accurate the scale was, but it seemed to be in line with the numbers others had posted (from corner weighings, etc.) so it seemed reasonable to me.
-Max
#7
Re: Re: What up with the posted factory weigths?
Originally posted by maxcooper
I weighed my stock base model with 3/8 tank of gas and it was 2780. This was at a recycling center that paid people based on the difference in vehicle weight on the way in and out. I don't know how accurate the scale was, but it seemed to be in line with the numbers others had posted (from corner weighings, etc.) so it seemed reasonable to me.
-Max
I weighed my stock base model with 3/8 tank of gas and it was 2780. This was at a recycling center that paid people based on the difference in vehicle weight on the way in and out. I don't know how accurate the scale was, but it seemed to be in line with the numbers others had posted (from corner weighings, etc.) so it seemed reasonable to me.
-Max
Trending Topics
#8
Full Member
Join Date: Mar 2001
Location: San Jose, CA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
My 94 R2, with a full tank of gas in it, in typical street configuration (i.e. with spare tire, jack, misc junk, etc.) came out to be 2790lbs.
The corner weights (this was done at a suspension shop):
with me in the car:
FL FR
RL RR
757 706
768 715
This is with the car adjusted to the same height at all 4 corners as a starting point, we hadn't even gotten around to tweaking anything yet. Needless to say, with a crossweight of 2lbs we didn't change anything. Without me in the car the cross weights did not change a great deal. Our speculation was that it was most likely due to the stiff springs on the M2 AD coilover suspension (550lbs/in springs front, 450lbs/in springs rear) and I don't weigh that much.
The corner weights (this was done at a suspension shop):
with me in the car:
FL FR
RL RR
757 706
768 715
This is with the car adjusted to the same height at all 4 corners as a starting point, we hadn't even gotten around to tweaking anything yet. Needless to say, with a crossweight of 2lbs we didn't change anything. Without me in the car the cross weights did not change a great deal. Our speculation was that it was most likely due to the stiff springs on the M2 AD coilover suspension (550lbs/in springs front, 450lbs/in springs rear) and I don't weigh that much.
#9
Full Member
Join Date: Mar 2001
Location: Chattanooga, TN
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mightyslash
The sticker says 3210 pounds, wtf?
The sticker says 3210 pounds, wtf?
So 3210-350 = 2860 lbs including a full tank of gas
you lose weight from stuff like aftermarket exhausts, downpipe, midpipe, lighter wheels, cf or fb hood, etc. since most stock pieces are heavier than aftermarket ones (except for some wheels)
#10
Re: Re: Re: What up with the posted factory weigths?
Originally posted by 7th Sense
Man, you use your FD as a dump truck? I hope I can have one too LOL
Man, you use your FD as a dump truck? I hope I can have one too LOL
-Max
#11
Full Member
Thread Starter
Join Date: Dec 2001
Location: Greenville, OH
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: What up with the posted factory weigths?
Originally posted by maxcooper
What scale? What mods? Was the whole car on the scale at once or did you add up weights from both axles weighed individually?
I weighed my stock base model with 3/8 tank of gas and it was 2780. This was at a recycling center that paid people based on the difference in vehicle weight on the way in and out. I don't know how accurate the scale was, but it seemed to be in line with the numbers others had posted (from corner weighings, etc.) so it seemed reasonable to me.
-Max
What scale? What mods? Was the whole car on the scale at once or did you add up weights from both axles weighed individually?
I weighed my stock base model with 3/8 tank of gas and it was 2780. This was at a recycling center that paid people based on the difference in vehicle weight on the way in and out. I don't know how accurate the scale was, but it seemed to be in line with the numbers others had posted (from corner weighings, etc.) so it seemed reasonable to me.
-Max
I used a weigh scale at grain and feed shop both axles were on the scasle its designed to weigh dump trucks.
#12
Full Member
Join Date: Mar 2001
Location: Chattanooga, TN
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Crash, the stock tank holds like 16 gallons right, that is 12 gallons that you are missing, which equals almost 100 pounds that you have to add to your weight to get the true "curb weight" that is referenced
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM