jtjerry

hello all
I am new there. Guys at clublexus.com told me that turbo asked is for rx7. So asking that same question on rx7 forum
there is link with my question and pisc:

http://www.clublexus.com/forums/show...24#post1415224

please look there and say more about that mistery turbo... is it cabable for 60 lbs/min?
that will help me much

thanks

Jerry

dubulup

looks like the size of the ebay turbo's .60 comp and 1.15 turbine. For a 13B application, I would say this combination is wacky. comp too small, turbine too big for street.

I believe these are good on diesel trucks???

jtjerry

I thinking put it in my lex sc400. there is v8 engine 4 litre.

at 7 psi I need 35-40 lbs/min air flow and at 10-12 psi about 50 lbs/min
will that turbo be good?

dubulup

I don't know...but thinking about the manifold. It will be hard to take advantage of the divided housing. 8 exhaust pulses into two sides. Other than that, it should spool nicely...granted the turbine housing can handle the V8 the compressor might work since V8's don't typical redline to high.

Good Luck.

MrJohnTan

The design of the lexus V8 in the SC400 leaves no room for a turbo / twin turbos in the engine bay. There are no successful turbocharged SC400's in the US for a reason. With the cost associated of the custom kit and stand alone fuel management, you are better off swapping in a 1JZ or 2JZGTE.

Good luck

jtjerry

thanks, but you are wrong, try clublexus or lextreme.com.

there is 2 or 3 1uzfe with single and at least one with twins.
my be next single. there is room for as big single as needed.
pic from my car.

please help with id that mistery turbo ...
it is new cheap and in place. but if it is to small or not good I will not buy it and try 62-1...

dubulup

if I were going thru the trouble...I'd wouldn't go cheap on the reason to go thru the trouble...catch my drift?