DGnizer

I just took off the injectors and the primaries are red just like I read in a lot of post but the secondarise are kind like light brown or tan. does anyone know what size and make they are? I'm about to pull them out and send them to RC tomorrow for clean/balancing and flow test. Will I be able to reuse an injector if I brake the small plastic piece on top of the injector? I mean i examined it and it doesn not seal or connect to anything. any input will be appreciated. thanks

Rocking Rotary

iTrader: (14)

yes you will be able to reuse your injector if that little piece of plastic brakes. If the tan topped ones your are talking about, are a little longer than the red topped ones, there 550cc primary injectors.

DGnizer

so what are you trying to say? I have 2 sets of 550cc 2 for primary(red top) and 2 for seconday(tan top). I though premaries are red and secondaries are green? Am I correct?

switch

They are made by Denso.
The secondaries (850cc ) are red and have 2450 stamped on the top.
The primaries(550cc) are tan/brown and have 195500-2460 on the side of the plastic. These are a bit longer in length.

About half of the FD injectors that come in have the top plastic damaged, so far none where so bad that it wouldn't function.

You can save some money.....We clean & flow test for $12 each (until next week when prices will go to $15 each).


Gordon
WitchHunter Performance
Injector cleaning & flow testing service

Rocking Rotary

iTrader: (14)

secondarys are red, they sit in the lower intake manifold these are 850cc there are 2 of them
primarys are tan, they sit inside the center housing these are 550cc there are 2 of them

That is if they are stock but if they are bored the should have and engraving on them. I have not seen green topped injectors for our car yet. Someone elso on the forum my know what they are. Are they side feed injectors?

DGnizer

the one i got from venom are green top and they modified it to give 1600cc . Of course I still have to get them tested just to make sure that they are really giving 1600cc. I think everyone with 1600cc from venom who have posted here siad it only flowed 550cc. I have this guy who claims that venom have corrected that mistake and the guy who was selling the old green top denso claimed to put out 1600cc was a fake. I'll post my result when I get the injectors from RC or maybe WitchHunter by next week. For now does anyone need 550 primaries? I'll sell mine. hehehe

Rocking Rotary

iTrader: (14)

What do you want for your 550's ?

DGnizer

is $70 shipped sound reasonable?