what size holley jet should i use?
#1
Junior Member
Thread Starter
Join Date: May 2001
Location: Sharpsburg,GA,
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
what size holley jet should i use?
I have a dp and high-flow cat and I am boosting at 7 with no pills. Just curious if someone has a similar set up and what size pills they are using. I believe stock sizes are .059 and .064. thanks in advance.
#2
Do it right, do it once
iTrader: (30)
I have a 93 R1 with Efini y-pipe, DP and CB and I'm running a .073 WG pill with the stock PC pill. I had a boost spike up to about 1bar with the stock pills.
A friend of mine had the EXACT same mods on his 93 Touring and didn't need to change the pills.
It is a little different for every car, you'll need to experiment a little.
Jeff
A friend of mine had the EXACT same mods on his 93 Touring and didn't need to change the pills.
It is a little different for every car, you'll need to experiment a little.
Jeff
#3
Full Member
Join Date: Oct 2001
Location: Ontario Canada
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
is the 64 jet stock in the wastegate or the prespool. I just installed a 67 in what i believe is my wastegate line. The stock pill I removed was equivalent to a 64 Jet. Did I pull the right one?
Also, I am using a 67 for:
custom cool air intake
downpipe
Exhaust
and am trying to maintain 10 PSI with a minimal dip, I will post once I take it out for a spin.
Andrew Wojteczko
Also, I am using a 67 for:
custom cool air intake
downpipe
Exhaust
and am trying to maintain 10 PSI with a minimal dip, I will post once I take it out for a spin.
Andrew Wojteczko
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM