What should my next mod be?
What should my next mod be?
03-21-02, 02:16 AM
#4
Senior Member
Join Date: Mar 2002
Location: HK/Toronto
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
First MOD: REMOVE your downpipe wrapings!!! It will melt your hoses and everything!
I did it to my PFS downpipe, and a few weeks later after lapping days and solo2 events. I noticed coolet leak thought it was the waterpump or some coolet lines but later it turned out that my downpipe was cracked and melted my lines, it costed me 3K Canadian to fix everything and got another PFS downpipe.
The wrapings is good for piston cars not rotory it will fry everything. It retains too much heat as if the rotory with the turbos are not hot enough. You want to draw heat away from the engine not retain them. Lose the wrapings. That shop told me the same thing happened to his customer's FC.
Hope this helps
I did it to my PFS downpipe, and a few weeks later after lapping days and solo2 events. I noticed coolet leak thought it was the waterpump or some coolet lines but later it turned out that my downpipe was cracked and melted my lines, it costed me 3K Canadian to fix everything and got another PFS downpipe.
The wrapings is good for piston cars not rotory it will fry everything. It retains too much heat as if the rotory with the turbos are not hot enough. You want to draw heat away from the engine not retain them. Lose the wrapings. That shop told me the same thing happened to his customer's FC.
Hope this helps
03-21-02, 02:29 AM
#5
Ex-gunslinger
Join Date: Nov 2001
Location: DFW
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
"I'm sorry, k9220ps, but you've modded everything. There's nothing left to mod."
little change up from a quote from Major Payne...just change out the word mod with kill....heh heh...funny movie.
little change up from a quote from Major Payne...just change out the word mod with kill....heh heh...funny movie.
03-21-02, 12:16 PM
#6
Junior Member
Join Date: Sep 2001
Location: Turlock, CA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
J-spec Conversion
Originally posted by ek9220ps
what do u mean by "i do them for $50"?
what do u mean by "i do them for $50"?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM