What part of the primary injector housing do I mill to fit secondary 850cc's?
Thread Starter
Joined: Jun 2003
Posts: 4,022
Likes: 24
From: Avondale, AZ
What part of the primary injector housing do I mill to fit secondary 850cc's?
Alright, I have to take this to a machine shop to get my injectors to fit, which do I Do. Take it off the top of the housing, or take it off the bottom (the part that sits inside).
ANyway, here are pics...
THe housing next to the injectors.. and the size difference between the primary (longer) And secondary injectors.
ANyway, here are pics...
THe housing next to the injectors.. and the size difference between the primary (longer) And secondary injectors.
Banned. I got OWNED!!!
Joined: Jul 2004
Posts: 1,179
Likes: 1
From: next to the polishing wheel!!!
The top is where the 4 screw holes are . Take off .125 thou from there .What does the shop charge? I get a hamgurger if it is hand delivered , if shipped to me it is five dollars plus shipping because of the time it takes to go to the shipping place . Do not let the shop charge you to much .
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
