3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

what kind of power should i expect at the dyno

Thread Tools
 
Search this Thread
 
Old Jul 28, 2008 | 07:38 PM
  #1  
xCxHxRxIxSx's Avatar
Thread Starter
Full Member
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: iowa
what kind of power should i expect at the dyno

just wanted to know what im looking at power wise. pfs exhaust , downpipe, pfs intake, pfs smic, pfs purple box, street port.
Reply
Old Jul 28, 2008 | 07:41 PM
  #2  
JStrib's Avatar
Recovering Rotary Guy
Tenured Member: 15 Years
iTrader: (6)
 
Joined: Mar 2007
Posts: 844
Likes: 0
From: Brandon, MS
how much boost? Flash (pettit) or standalone (PFC) ECU? Stock fuel i guess?
Reply
Old Jul 28, 2008 | 07:43 PM
  #3  
xCxHxRxIxSx's Avatar
Thread Starter
Full Member
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: iowa
its got the pfs tune . it has three pre set boost settings . first one is ten then i think medium is 12 and the last is 14 .
Reply
Old Jul 28, 2008 | 08:07 PM
  #4  
Carpenter's Avatar
T67, did I say 7?
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 171
Likes: 0
From: Raleigh
Depends, I'd say around 315-330.
We need more facts........?
Reply
Old Jul 28, 2008 | 08:11 PM
  #5  
93rx74lyfe's Avatar
Ronald..
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2005
Posts: 2,013
Likes: 1
From: Fairfax/Manassas VA
At 12lbs. Ide say 290-300. What fuel upgrades have you done. If none, dont bother going over 10lbs.
Reply
Old Jul 28, 2008 | 08:23 PM
  #6  
xCxHxRxIxSx's Avatar
Thread Starter
Full Member
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: iowa
im not too sure i know i got new pump .i just bought this car . i just posted up new thread found some problems when i just went out to drive it . i think i got a lemon and im very po
Reply
Old Jul 28, 2008 | 08:28 PM
  #7  
heidihi's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 499
Likes: 0
From: ames, iowa
dont go get a tune then if you dont know what you have yet!
Reply
Old Jul 28, 2008 | 08:29 PM
  #8  
Cgotto6's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,996
Likes: 60
From: Maltby, Washington
Originally Posted by xCxHxRxIxSx
im not too sure i know i got new pump .i just bought this car . i just posted up new thread found some problems when i just went out to drive it . i think i got a lemon and im very po
Enjoy the show at the dyno. Just kidding. Good luck.
Reply
Old Jul 28, 2008 | 08:32 PM
  #9  
heidihi's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 499
Likes: 0
From: ames, iowa
i see ur in iowa! where at? im in peoria illinois but i drive to ames sometimes for the iowa state college!
Reply
Old Jul 28, 2008 | 08:33 PM
  #10  
93rx74lyfe's Avatar
Ronald..
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2005
Posts: 2,013
Likes: 1
From: Fairfax/Manassas VA
You really should find more info about your car before you waste your time/money at the dyno.
Reply
Old Jul 28, 2008 | 08:40 PM
  #11  
Carpenter's Avatar
T67, did I say 7?
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 171
Likes: 0
From: Raleigh
My car had those same mods (years back) except for the streetport.
Fresh motor, and running 13 psi, dyno'd at 315.
Reply
Old Jul 28, 2008 | 08:40 PM
  #12  
xCxHxRxIxSx's Avatar
Thread Starter
Full Member
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: iowa
yeah most likely this car is going back . im really po . everything that could go wrong did in like ... a day. its a lemon .

i live in muscatine iowa so im close to isu but i have to say go hawks! lol
Reply
Old Jul 28, 2008 | 08:42 PM
  #13  
Carpenter's Avatar
T67, did I say 7?
Tenured Member 05 Years
 
Joined: Jan 2008
Posts: 171
Likes: 0
From: Raleigh
So...what were some of the problems?
Reply
Old Jul 28, 2008 | 09:10 PM
  #14  
xCxHxRxIxSx's Avatar
Thread Starter
Full Member
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: iowa
oil light came on and i checked level smelt like pure gas . i was going to put more oil in then a puff of smoke came out of the filler....... trannys reverse shitted out in less then a week .
Reply
Old Jul 28, 2008 | 10:21 PM
  #15  
heidihi's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 499
Likes: 0
From: ames, iowa
if u need a 5 speed I got one i can drive to you if ya need it.. its cheap!! and works great but I aint installing it!
Reply
Old Jul 28, 2008 | 10:36 PM
  #16  
xCxHxRxIxSx's Avatar
Thread Starter
Full Member
 
Joined: Jun 2008
Posts: 70
Likes: 0
From: iowa
pm the price heidihi. i was looking at getting a pettit fully rebuilt tranny they are a bit pricey but they are guaranteed to work for a while lol . so yeah just pm me price .
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM




All times are GMT -5. The time now is 12:57 AM.