What else should I do?
#1
#1 F0RUM TROLL
Thread Starter
Join Date: Mar 2002
Location: Naugatuck, CT
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
What else should I do?
In the next month or so im going to do my vacuum hose job. I figured while everything was appart why not do the simplification. Remove all the emmisions stuff, Going to be replacing the belts adding DP and full open exhaust(MP bacck) + computer. Any suggestions as to what else I should do while everything is appart. Or anything that would be easy to do.
#4
Rotary Enthusiast
iTrader: (2)
Try this:
http://www.rx7turboturbo.com/robrobi...e_throttle.htm
this:
http://www.rx7turboturbo.com/robrobi...dy_coolant.htm
and/or this:
http://www.rx7turboturbo.com/robrobinette/pcv.htm
I was there today looking around and saw your post.
also plugs, wires, etc...
http://www.rx7turboturbo.com/robrobi...e_throttle.htm
this:
http://www.rx7turboturbo.com/robrobi...dy_coolant.htm
and/or this:
http://www.rx7turboturbo.com/robrobinette/pcv.htm
I was there today looking around and saw your post.
also plugs, wires, etc...
#6
Rotary Enthusiast
Join Date: Feb 2001
Location: Montreal, PQ
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Dont_Be_A_Rikki
Go full NON-SEQ . And if you want to get crazy take off the manifold and cut out the TCA. That will improve the flow and gain a few HP.
That is some of the recipe for the secret suace
-Rikki
Go full NON-SEQ . And if you want to get crazy take off the manifold and cut out the TCA. That will improve the flow and gain a few HP.
That is some of the recipe for the secret suace
-Rikki
#7
#1 F0RUM TROLL
Thread Starter
Join Date: Mar 2002
Location: Naugatuck, CT
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Non sequential not really worth it for me right now. Engine not ported. Even with a full exhaust I wouldnt get all the benifit of a Non seq setup.
Trending Topics
#9
Re: What else should I do?
Originally posted by blackscorpio
In the next month or so im going to do my vacuum hose job. I figured while everything was appart why not do the simplification. Remove all the emmisions stuff, Going to be replacing the belts adding DP and full open exhaust(MP bacck) + computer. Any suggestions as to what else I should do while everything is appart. Or anything that would be easy to do.
In the next month or so im going to do my vacuum hose job. I figured while everything was appart why not do the simplification. Remove all the emmisions stuff, Going to be replacing the belts adding DP and full open exhaust(MP bacck) + computer. Any suggestions as to what else I should do while everything is appart. Or anything that would be easy to do.