I have a fried ground wire on ground point jc-01. i traced it as far as i can, and before i start to rip my car apart i was wondering if anyone can help me. you can see a pic of its location on the fsm page z-19. there are 5/6 wires off the connector. its one of the outside wires.

 

Im doing a wire tuck right now and i can tell you between the two grounds... EVERY thing. it may only have 5 wires but it forks and forks and forks. the heavy gauge wire connect the two grounds together as well as the fan ground. headlights, headlight motors, combo lights, side markers, litterally everything.

 

if it fried so bad that it no longer has continuity you may have to unplug every plug on the front harness and test continuity between the black wire and ground. When i get home i will try and find what i can in the wiring diagram.

 

thanks. the car runs and drives fine. only things that i know that does not work is the abs. my fans died a long time ago and i have them setup on a seperate relay and switch. and i have no a/c. ive been doing a front harness relocation and found that one fried wire. just wondering if i should leave it or just cut it out.

 

Not sure about the abs. Looks like my previous owner hacked it out because its looped at the fuse box.

PM me your front harness relocation when your done ide like to see how youre doing it, how im doing my wire tuck is taking forever. Could be that i only work on it like once a week though haha.

 

looks like it is an airbag sensor.