What to do with $100?
Thread Starter
Full Member
Joined: Jul 2002
Posts: 137
Likes: 0
From: Louisiana
What to do with $100?
I just ordered a set of Tein HA dampers so I'm only going to spend $100 next. What would you guys recommend I spend then money with on my FD? I was leaning towards a Sparco shift ****, but I just wanted some opinions first. Give me some **** I can buy for my FD for around $100.
Brandon
Brandon
Senior Member
Joined: Jun 2002
Posts: 277
Likes: 0
From: Indiana
A cheapo front shock tower brace? Just be careful in selecting a universal shift **** like Momo or Sparco... they don't always fit too well. The Mazdaspeed CF **** on the other hand is threaded for the FD, just a thought.
Rotary Freak
Joined: Mar 2001
Posts: 2,236
Likes: 1
From: San Francisco, CA
Like gnobsav said...hop on ebay an buy a cheap strut tower brace. They really do improve handling/feel.
I would also suggest a downpipe if you don't have one. You can buy those for $100-150.
Or you could Make a cold air intake like Pettit's: go to Kragen and order two K&N Cone shaped filters and make an Intake heat sheild out of some aluminum Sheet metal. Also run some 3" ducting form the nose of the car up to the filter(s)
Make a Torque Brace. $20
I would also suggest a downpipe if you don't have one. You can buy those for $100-150.
Or you could Make a cold air intake like Pettit's: go to Kragen and order two K&N Cone shaped filters and make an Intake heat sheild out of some aluminum Sheet metal. Also run some 3" ducting form the nose of the car up to the filter(s)
Make a Torque Brace. $20
Last edited by jpandes; Oct 2, 2002 at 05:08 PM.
Lurking..................
Joined: Mar 2001
Posts: 2,220
Likes: 0
From: PA
99 spec tail light conversion, shift **** like someone said, cheap strut tower bar like someone said, used FD rear wing if you want one and your FD doesn't have one, set of leather shift/ebrake boots.
Trending Topics
Meesto Spakaro
Joined: May 2001
Posts: 489
Likes: 0
From: Redondo Beach, CA
Send your tail lights and 50 dollars to me, and I'll convert them to '99 tail lights 
100 dollars...
Unleaded Racing Gas
Wires to relocate battery
1 solenoid and 2 one-way check valves...for when you have boost problems
AST
5 nights at a seedy motel
a Broadway Mirror, Powered By Decal, and some Neons
100 dollars...
Unleaded Racing Gas
Wires to relocate battery
1 solenoid and 2 one-way check valves...for when you have boost problems
AST
5 nights at a seedy motel
a Broadway Mirror, Powered By Decal, and some Neons
boost deprived
Joined: May 2002
Posts: 152
Likes: 0
From: sioux city, IA
oil
AST
taillights
driving lights (if you don't already have some)
boost/water guage
a-pillar
efini center caps/emblems
stickers (hehe)
one stock front rotor
Hawk brakepads
block off plates
new engine ground
and i'm sure there's many many more
AST
taillights
driving lights (if you don't already have some)
boost/water guage
a-pillar
efini center caps/emblems
stickers (hehe)
one stock front rotor
Hawk brakepads
block off plates
new engine ground
and i'm sure there's many many more
Last edited by JimmyJimboJet; Oct 2, 2002 at 07:35 PM.
Lives on the Forum
Joined: May 2001
Posts: 5,097
Likes: 1
From: southern NJ
how about some reading material. like that hard back book...what is the name of the author? DAMN it slipped my mind.
or gas and definatly a boost guage. and NOT a shift ****. or put that $100 away and save some more money and do some reading and research on here about your "next" mods...
unless you are going to die if you dont spend those 100 clams.
or gas and definatly a boost guage. and NOT a shift ****. or put that $100 away and save some more money and do some reading and research on here about your "next" mods...
unless you are going to die if you dont spend those 100 clams.
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
Go to your local nudy bar. 
That should last you a good 15 min "lol" ! OK, serioulsy you could get a pair of high wattage krypton light bulbs.
That should last you a good 15 min "lol" ! OK, serioulsy you could get a pair of high wattage krypton light bulbs.
Last edited by GoRacer; Oct 2, 2002 at 08:10 PM.
Lurking..................
Joined: Mar 2001
Posts: 2,220
Likes: 0
From: PA
Originally posted by r0t0r-rooter
Send the $100 to me and i'll tell you the secret to getting people to send you $100....
Send the $100 to me and i'll tell you the secret to getting people to send you $100....
Don't forget you need him to send a self addressed stamped envelope with that too..(Wouldn't want you to have to pay for the stamp)
Thread Starter
Full Member
Joined: Jul 2002
Posts: 137
Likes: 0
From: Louisiana
Originally posted by rxrotary2_7
or put that $100 away and save some more money and do some reading and research on here about your "next" mods...
or put that $100 away and save some more money and do some reading and research on here about your "next" mods...
I think I'm going to go with an aluminum AST though. Thanks guys!Brandon
Full Member
Joined: Sep 2002
Posts: 190
Likes: 0
From: Edwards AFB, CA
I got a set of slotted and crossdrilled rotors from www.irotors.com (I actually won them on E-bay. I was a little sceptical till I got them. Holly S**T what a steel $120 for a brand new set. They are on my car and look and work great. I was very pleased. (r&r them was a challenge breaking loose the two #3 philips screws that hold the rotors to each hub) Keep your eye on ebay I I cant atest for anyone other than what irotors was selling. So save it till you have 133 (shipping inculded)
Full Member
Joined: Sep 2002
Posts: 190
Likes: 0
From: Edwards AFB, CA