what aftermaket gauges have the stock orange backlight color?
what aftermaket gauges have the stock orange backlight color?
i want to get some gauges that match the orange backlight color of the stock gauges, and black faced. Who makes some?
thanks
thanks
Autometer Z-series gauges are nearly a perfect match. They come with red or green bulb caps. I used the red caps and they match my stock guages perfectly. I was thinking about fabricating a chrome ring insert to make them identical to stock. Here is a pic from Summit's website...
Trending Topics
thats my interior!!!
the defi d-gauges are nice and they are almost stock color. I think it would be a perfect match for a 93. The color and the style are pretty much identical to the 93 interior. Only thing is that boost goes to 30 psi.
the defi d-gauges are nice and they are almost stock color. I think it would be a perfect match for a 93. The color and the style are pretty much identical to the 93 interior. Only thing is that boost goes to 30 psi.
That's for you Monster Single Turbo on AvGas 
You Just have "Upgrade Possibilities"
BTW I have the same Defi Setup with Oil/Water on the top and Boost on the bottom, very clean looking, (Hint: you can polish the rings on the defi ones and make them shiny like stock)

You Just have "Upgrade Possibilities"

BTW I have the same Defi Setup with Oil/Water on the top and Boost on the bottom, very clean looking, (Hint: you can polish the rings on the defi ones and make them shiny like stock)
Most gauges have removable bulbs, which can be covered. Orange bulb covers can be purchased at www.egauges.com for about $3 each.
I have them on my VDO gauges, and they are a perfect match. Not "nearly perfect", they are perfect!!
I have them on my VDO gauges, and they are a perfect match. Not "nearly perfect", they are perfect!!
Gauges
I have an amber Boost and an analog A/F gauge from Nordskog that match the dash lights.
Take a look.
http://www.nordskogperformance.net/
Take a look.
http://www.nordskogperformance.net/
Also u can go with the auto meter atm serires. I use the atm-2532 water temp and the atm-2401 boost/vacuum gauge. I have change the bulb to red and it match the factory gauges, also both gauges has the chorme ring on them.
Originally posted by waysho
Only thing is that boost goes to 30 psi.
Only thing is that boost goes to 30 psi.
Or is that not enough? 
Regarding the d-gauges, has anyone ever seen any polished trim on those? I dunno how tacky it would look, but to furthur match the stock trim...know what I mean?
Anyway, that's what I have too. Boost, Oil press. and temp on the center speaker spot. Love those. If you want to be really picky, there's a bit of white that peers out from behind the needle center. They're LED lights. White, not orange or red. I was actually thinking about going to an LED deal this winter. Try to even out the lighting and brighten some things up a bit.
I'd definitely hit the d-gauges. They even match the odd tick marks with some things (boost (2.5 psi/mark) and MPH (2.5 MPH/mark))
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
rx8volks
Canadian Forum
3
Aug 20, 2015 10:24 PM








