i cant seem to find out where the o2 sensor is plugged in .i dont see any unused plugs in the engine bay ..any help and pics would be cool thankes

 

it's behind the UIM along the fire wall...

I'd take a pic since I have my UIM off, but it's too dark.

 

Single black wire spade connector near the P side firewall.

 

Exactly what they said. Usually it is right by the lifting point on the UIM.

 

heheh im about to replace mines too

 

uim please explain

 

upper intake manifold.

I'll try to snap a pic when I get home...but for now, here is a rough outline of where the wire goes. it comes from just below the intake, as you know, goes up and around and the connector is round about where I put the large red circle.

 

It's not a spade connector. It's a 1 wire plug.

Dave

 

+1

That pretty much shows ya!

 

ok i found one plug and it looks like the o2 plug but there is also like a ground plug is that related

 

The ground plug connects to spade connect sticking out from the firewall, behind the passenger side of the UIM.

Or possibly on the back of the UIM. Seems I've seen both.

Look around a bit, it's there.

 

yah, it is all in the same general area. Just look. You'll find it.

 

so the plug i found is the 02 plug .....finaly thankess alot