Water pump electrical connector
#1
The Ninja
Thread Starter
Join Date: Mar 2007
Location: Thunder Bay, Ontario
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Water pump electrical connector
Hey everyone, I was in the process of reinstalling my fuel rails after fixing a fuel leak when I accidentally broke an electrical connector on the back of my water pump. It's a black round connector with a single B/R wire, right underneath what looks like a temp sensor.
Just wondering what this connector is and if anyone knows where I can get a new one. Thanks.
Nate
Just wondering what this connector is and if anyone knows where I can get a new one. Thanks.
Nate
#2
Where does this bolt go?
iTrader: (8)
Join Date: Oct 2008
Location: TN
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
I don't think you can buy just the connector. I have 2 used harnesses and both of them have issues at that connection. You may be able to extract the spade from inside the connector and then re solder the wire.
#3
The Ninja
Thread Starter
Join Date: Mar 2007
Location: Thunder Bay, Ontario
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
OK, just wondering is this the "fan switch" connector? I was just looking at Pettit's site and found their 180 degree fan switch that apparently comes with a new connection. Here's the link, its the first item:
http://www.pettitracing.com/rx7/index_cooling.htm
http://www.pettitracing.com/rx7/index_cooling.htm
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM