Walbro Fuel pump install tips...
#1
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
Walbro Fuel pump install tips...
I'll be installing my Walbro in-tank tomorrow. It came with all the necessary hardware. My gas tank is already almost empty; does anyone have any other tips or advice?
Thanks guys--
Thanks guys--
#3
Blow up or win
Re: Walbro Fuel pump install tips...
Originally posted by GoodfellaFD3S
I'll be installing my Walbro in-tank tomorrow. It came with all the necessary hardware. My gas tank is already almost empty; does anyone have any other tips or advice?
Thanks guys--
I'll be installing my Walbro in-tank tomorrow. It came with all the necessary hardware. My gas tank is already almost empty; does anyone have any other tips or advice?
Thanks guys--
Also make sure you replace the clamps on the fuel lines in the same position as when you took them off. Inhale deeply........:p
#4
Rotary Enthusiast
Join Date: Feb 2001
Location: In the Sky
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
#5
Full Member
Join Date: Jul 2001
Location: Oceanside, California
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Wha's the skinny? Is the fuel pump inside the gas tank? Whoa! That a wierd one, I am stunned...None of my other vehicles have had electrics ran "into" the gas tank. I see I see, it's an RX-7.:p Well then, it looks pretty simple.
#7
Original Gangster/Rotary!
Thread Starter
iTrader: (213)
The Walbro flows 255 l/hr and is a high pressure pump. It was $128 w/shipping and tax. Much cheaper than the pump RP sells, and the data I've seen rated it as one of the best out there. Wade Lanham has a fuel pump comparo on his site; I'm at work tight now and have the link at home so can't get it for you guys.
Maybe someone else can supply the link?
--Rich
Maybe someone else can supply the link?
--Rich
Trending Topics
#8
Pimpin Rotors...and Hoes
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Here is Wade Lanaham's website that has some good info. on the Walbro pump. http://www.wvinter.net/~flanham/wlanham/
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM