Walbro Fuel pump install tips...
I'll be installing my Walbro in-tank tomorrow. It came with all the necessary hardware. My gas tank is already almost empty; does anyone have any other tips or advice?
Thanks guys-- |
Get some wd40 to loosen up the screws on there. It's probably really dirty in there. I did mine two days ago. It's pretty easy. Drop in.
|
Re: Walbro Fuel pump install tips...
Originally posted by GoodfellaFD3S I'll be installing my Walbro in-tank tomorrow. It came with all the necessary hardware. My gas tank is already almost empty; does anyone have any other tips or advice? Thanks guys-- Also make sure you replace the clamps on the fuel lines in the same position as when you took them off. Inhale deeply........:p |
|
Wha's the skinny? Is the fuel pump inside the gas tank? Whoa! That a wierd one, I am stunned...None of my other vehicles have had electrics ran "into" the gas tank. I see I see, it's an RX-7.:p Well then, it looks pretty simple.:D
|
waldo fuel pump
How does the waldo fuel pump compare to stock and who has a good price on one?
|
The Walbro flows 255 l/hr and is a high pressure pump. It was $128 w/shipping and tax. Much cheaper than the pump RP sells, and the data I've seen rated it as one of the best out there. Wade Lanham has a fuel pump comparo on his site; I'm at work tight now and have the link at home so can't get it for you guys.
Maybe someone else can supply the link? --Rich |
Here is Wade Lanaham's website that has some good info. on the Walbro pump. http://www.wvinter.net/~flanham/wlanham/ ;)
|
All times are GMT -5. The time now is 01:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands