vmount deflector design dilemma
#1
Full Member
Thread Starter
Join Date: Jul 2010
Location: nz
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
vmount deflector design dilemma
Hi all, just finishing up my vmount setup, and having bit of a dilemma here,
Ive madde the defelector so there is about an inch of space between the aluminium sheet and bottom of the radiator, but after positioning it so that the radiator doesnt make contact with the ground, the deflector is very very nearly in line with the top of the opening of the bumper. Im just concerned that on the track if Im doing 180kph down the straight and the intercooler doesnt get cold air to it. is this a possibility ?
any input would be great.
thanks
Ive madde the defelector so there is about an inch of space between the aluminium sheet and bottom of the radiator, but after positioning it so that the radiator doesnt make contact with the ground, the deflector is very very nearly in line with the top of the opening of the bumper. Im just concerned that on the track if Im doing 180kph down the straight and the intercooler doesnt get cold air to it. is this a possibility ?
any input would be great.
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM