vid of my 336whp run
#1
vid of my 336whp run
se7en dyno run
mods:
New Mazda reman motor (8/01)
NGK race plugs 10.5's
Pettit hybrid turbo's
Polished Efini Y-Pipe and intake manifold
Apexi GT FMIC and air intakes
Silicone hose job
Blitz D-SBC and turbo timer
HKS dp and cat-back
Rick Stiles Supercars MP & tuned ECU
underdrive pullies
Walbro 255hp fuel pump
Mazdatrix short shift kit
**Dynoed 336whp @14lbs.**
mods:
New Mazda reman motor (8/01)
NGK race plugs 10.5's
Pettit hybrid turbo's
Polished Efini Y-Pipe and intake manifold
Apexi GT FMIC and air intakes
Silicone hose job
Blitz D-SBC and turbo timer
HKS dp and cat-back
Rick Stiles Supercars MP & tuned ECU
underdrive pullies
Walbro 255hp fuel pump
Mazdatrix short shift kit
**Dynoed 336whp @14lbs.**
Trending Topics
#15
thanks for the compliments guys. I have got to be one of the happiest RX-7 owners in the world
stokedxiv, the car now sits on 335/35/17 Kuhmo Ecsta V700's on 17"x12" Complete Custom Wheel and 17"x10" w/ 275/45's up front.
I just changed to the 335's a couple months ago. They work, but just barely. They rub a little bit on the inside wheel well. It's not really noticeable except under really hard cornering or at an AutoX. At the last AutoX, I had smoke boiling up during each run. Example.
I hammered some on the inside wheel wells and I think its a lot better now, just still need to test it on an AutoX track to be sure. Previously, I ran the 315/35 Kuhmo Victoracers and they fit/worked just fine
My car has always been know locally for it's wild flames, I think it's cool myself
video: night time shooting flames (when my car was still black)
apneablue, I'm not sure who was standing in front of the car, I guess they felt safe, I was to the side
I don't have no stinkin' cat. I live in Arkansas, the state of NO emissions testing:lol
stokedxiv, the car now sits on 335/35/17 Kuhmo Ecsta V700's on 17"x12" Complete Custom Wheel and 17"x10" w/ 275/45's up front.
I just changed to the 335's a couple months ago. They work, but just barely. They rub a little bit on the inside wheel well. It's not really noticeable except under really hard cornering or at an AutoX. At the last AutoX, I had smoke boiling up during each run. Example.
I hammered some on the inside wheel wells and I think its a lot better now, just still need to test it on an AutoX track to be sure. Previously, I ran the 315/35 Kuhmo Victoracers and they fit/worked just fine
My car has always been know locally for it's wild flames, I think it's cool myself
video: night time shooting flames (when my car was still black)
apneablue, I'm not sure who was standing in front of the car, I guess they felt safe, I was to the side
Street King WOW! Good deal and all with the main cat in place.
#16
Eats, Sleeps, Dreams Rotary
Originally posted by legendrx7
I don't have no stinkin' cat. I live in Arkansas, the state of NO emissions testing:lol
I don't have no stinkin' cat. I live in Arkansas, the state of NO emissions testing:lol
We are raffling off RP T-shirts and hats (also will have event t-shirts), a code checker, BBQ, photo shoot with a local photographer, volleyball, a Zaino wax demo, and an RX-3 "should" be there. Just good people and good conversation, and a good time.
Edit: Do you still have the stock injectors?
Last edited by apneablue; 05-28-03 at 02:42 PM.
#17
Old and grumpy
iTrader: (4)
Originally posted by legendrx7
stokedxiv, the car now sits on 335/35/17 Kuhmo Ecsta V700's on 17"x12" Complete Custom Wheel and 17"x10" w/ 275/45's up front.
I just changed to the 335's a couple months ago. They work, but just barely. They rub a little bit on the inside wheel well. It's not really noticeable except under really hard cornering or at an AutoX. At the last AutoX, I had smoke boiling up during each run.
stokedxiv, the car now sits on 335/35/17 Kuhmo Ecsta V700's on 17"x12" Complete Custom Wheel and 17"x10" w/ 275/45's up front.
I just changed to the 335's a couple months ago. They work, but just barely. They rub a little bit on the inside wheel well. It's not really noticeable except under really hard cornering or at an AutoX. At the last AutoX, I had smoke boiling up during each run.
thanks again
Charlie
#20
xstacy7, my car actually looks a lot like that one. That is the Pettit road race car. I have the same exact (made from the same mold) flares and front end as that car.
stokedxiv, I have a bunch of pics uploaded to my domain click
here to see more than you probably want too
apneablue, sounds like fun, but I have to work Friday night in Memphis from 4pm til' possibly 5am, so I'll probably be sleeping while you guys have your BBQ. Have fun, I hope it turns out good. And thanks for the invite, maybe if I knew about it more in advance
And yes, I do still run stock injectors. The dyno graph showed a solid 11.6 a/f ratio which is very safe. I never run it above 13lbs. on pump gas and never above 1 bar on race gas. I know that I need to upgrade, but I just haven't got around to it
stokedxiv, I have a bunch of pics uploaded to my domain click
here to see more than you probably want too
apneablue, sounds like fun, but I have to work Friday night in Memphis from 4pm til' possibly 5am, so I'll probably be sleeping while you guys have your BBQ. Have fun, I hope it turns out good. And thanks for the invite, maybe if I knew about it more in advance
And yes, I do still run stock injectors. The dyno graph showed a solid 11.6 a/f ratio which is very safe. I never run it above 13lbs. on pump gas and never above 1 bar on race gas. I know that I need to upgrade, but I just haven't got around to it
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
rkhanso
2nd Generation Specific (1986-1992)
1
08-13-15 11:40 AM