3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

vibration through cabin on pulls?

Thread Tools
 
Search this Thread
 
Old Jan 15, 2013 | 04:51 PM
  #1  
ppritchard's Avatar
Thread Starter
93 Touring
Tenured Member 15 Years
 
Joined: Aug 2005
Posts: 968
Likes: 4
From: Longwood FL
vibration through cabin on pulls?

Always something.

Now, if you try and pull at all in any gear, there is a vibration and sound that could be coming from the interior plastics or the rear struts area.

I know the ppf can cause similar, BUT -- I can't believe that would be an issue. The car is a daily driver and I've Never had any kind of strong start or other misuse. Only action is normal pulls in 2nd and 3rd.

Recent rebuild and of course things were unhooked -- any ideas?

It is a vibrating, plastics rattling deal and only under acceleration.

Thanks, as always.
Reply
Old Jan 15, 2013 | 05:48 PM
  #2  
beckrx's Avatar
Cosmo's Factory
Tenured Member 10 Years
iTrader: (18)
 
Joined: Jun 2007
Posts: 287
Likes: 2
From: Florida
In what condition are your differential bushings?
Reply
Old Jan 15, 2013 | 07:12 PM
  #3  
Vader's Avatar
Unmatched Power and Fury
 
Joined: Nov 2004
Posts: 213
Likes: 1
From: Pray you never find out
I've heard stories of rear dif's vibrating when they start to go bad. Have you put the car up and pulled at the suspension to see i anything is loose?
Reply
Old Jan 15, 2013 | 11:36 PM
  #4  
ArmenMAxx's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (21)
 
Joined: Jul 2005
Posts: 1,629
Likes: 55
From: Los Angeles
Did you change your flywheel/clutch? I ask because you may have installed the wrong counterweight. Thats what I did years ago and still deal with the vibrations at high rpm .
Reply
Old Jan 16, 2013 | 06:29 AM
  #5  
ppritchard's Avatar
Thread Starter
93 Touring
Tenured Member 15 Years
 
Joined: Aug 2005
Posts: 968
Likes: 4
From: Longwood FL
Replaced the rear diff hanger this past year with a low mileage one, doubt that it would be an Issue. Did Not replace the clutch, but that area is Suspect given some other noises that I have

The vibration is real though, can't tell whether it's shaking the bins and plastics or the whole frame.

Thanks
Reply
Old Jan 16, 2013 | 04:37 PM
  #6  
Fritz Flynn's Avatar
All out Track Freak!
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (263)
 
Joined: Jul 2001
Posts: 10,672
Likes: 413
From: Charlottesville VA 22901
Originally Posted by ppritchard
Replaced the rear diff hanger this past year with a low mileage one, doubt that it would be an Issue. Did Not replace the clutch, but that area is Suspect given some other noises that I have

The vibration is real though, can't tell whether it's shaking the bins and plastics or the whole frame.

Thanks
Typically a cracked power plant frame it will move out of shape and the drive shaft will rub on something.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
Jul 17, 2019 02:20 PM




All times are GMT -5. The time now is 11:36 AM.