Ok, i was using the pic below to vent my BOV when i got confused. I dont know what happened to the pipe highlighted in green. There is nothing written about it so can i just take it off or what??? Any help will be greatly appreciated. Thanks.

 

another question... sorry

I have the whole air box out right now and i can not find where the tube that comes out the right side of the airbox attaches to. It just kinda came off with the air box and I can not find anywhere for it to attach.

If you guys know anywhere on the net that i can find out, send the link please, thanks.

 

that hose on the right doesn't attach to anything, it just vents out under the intake box

 

ok, good, thanks, anyone know anything about the one on th back please

 

all you have to do is pull the hose with the ABV on it out of the airbox and cap the airbox(less than 3min) I got tire of mine. the snezzy noise will get old after a month or 2. But every body should experience it
I will admit, its badass at first

 

yeah, i know but i was also replacing the air filter at the same time. why doesnt he have a tube at the top?

 

you don't have to take the airbox off or anything like that. while looking at the airbox from the front of the car, the two hoses that are about 1" in diameter (one above the other), the bottom one of the two should be disconnected from the airbox. you don't have to move anything else. just make sure to cap the one open nipple from the airbox... i used double-sided tape rolled up against itself and shoved it in the hole (you can poke it out by taking the box cover off), but after i did mine i read you can use a bottle cap from a 20 oz. to cap it.

 

About that missing 1" hose that goes to a metal pipe. I removed that because I eliminated my ACV (Air Control Valve) and it no longer served a purpose.

 

thanks, a lot guys, i got it working, but it is a bit quieter than expevted. I like it anyways. Thanks for the help.

 

darn! how loud did you expect it to be? mine's loud as hell... so loud it scares people on the street sometimes I can't wait to get my new intake to muffle it a little (not too much of course )

 

mines not loud at all. I doubt you could even hear it from the street. its jsut like a quiet psh.

 

I used 5/8 rubber caps available @ Autozone, etc. They just shove right on there. You can cap things that are pressured with these to, up to about 14psi, then the tops start ripping off them.

Ask me how I know? Had one on my y-pipe right were the BOV connects because I got the Greddy Elbow w/Greddy Type S BOV. Was racing a vette and lost because the top ripped off the rubber cap under 14psi boost @ about 135Mph.

K

 

are you sure you are making full boost?

the stockers are very loud.