Various eBay Parts - Experience? (SEARCHED)
#1
Various eBay Parts - Experience? (SEARCHED)
Yes, I have searched. Tried both "eBay pulley" (with no results) and "eBay parts" (with nothing current or related to what I'm looking for). It's strange that I can't find any decent results...I know these questions come up every now and then but it seems like no one ever has any 1st hand experience.
Anyway, I was just browsing though the eBay "FD3S" search results and a lot of parts came up that looked to be very inexpensive. Now, I'm definitely one to agree with the phrase, "you get what you pay for" but there are always exceptions to the rule.
There are a few different parts that I was wondering if anyone had 1st hand experience with.
FD3S Water-pump & Alternator Pulley Kit
LINK TO SEARCH RESULTS
There appear to be two different kits, one for $25 (without belt) and one for $60 (with belt). Both appear to have the same pulleys. Who has experience with either of these kits? How do they compare to the more expensive GReddy or Pettit Racing kits?
FD3S Down-pipe / Testpipe
LINK TO SEARCH RESULTS
Once again it looks like there are two different "kits" for sale. One for about $50 and another for about $100, and once again they appear to be about the same kit. Who uses, or has used, one of these kits on their car? How is the fit? What about the O2 sensor bung? How about the overall quality?
FD3S (Bomz) Polished Intake Pipes
LINK TO SEARCH RESULTS
Now here is one that I have personal experience with. These kits go for around $50 on eBay and are pretty straight forward. They will work with the stock intake, some aftermarket intakes, or can be used to build a home-made intake setup. I purchased as set of these for my previous FD and used them with the M2 airbox. I must say, The pipes themselves are very nice, but DO NOT USE THE COUPLINGS! The couplings melt/split within the first few hours of use. If you're just looking for the polished pipes, this is a pretty good deal.
Here is a picture of them installed in a home-made intake setup (heat-shield + two filters):
Also, here is a picture of them installed with the M2 airbox on my previous FD:
So, any one have 1st hand experience with the pulley kit or the down-pipe kit?
Anyway, I was just browsing though the eBay "FD3S" search results and a lot of parts came up that looked to be very inexpensive. Now, I'm definitely one to agree with the phrase, "you get what you pay for" but there are always exceptions to the rule.
There are a few different parts that I was wondering if anyone had 1st hand experience with.
FD3S Water-pump & Alternator Pulley Kit
LINK TO SEARCH RESULTS
There appear to be two different kits, one for $25 (without belt) and one for $60 (with belt). Both appear to have the same pulleys. Who has experience with either of these kits? How do they compare to the more expensive GReddy or Pettit Racing kits?
FD3S Down-pipe / Testpipe
LINK TO SEARCH RESULTS
Once again it looks like there are two different "kits" for sale. One for about $50 and another for about $100, and once again they appear to be about the same kit. Who uses, or has used, one of these kits on their car? How is the fit? What about the O2 sensor bung? How about the overall quality?
FD3S (Bomz) Polished Intake Pipes
LINK TO SEARCH RESULTS
Now here is one that I have personal experience with. These kits go for around $50 on eBay and are pretty straight forward. They will work with the stock intake, some aftermarket intakes, or can be used to build a home-made intake setup. I purchased as set of these for my previous FD and used them with the M2 airbox. I must say, The pipes themselves are very nice, but DO NOT USE THE COUPLINGS! The couplings melt/split within the first few hours of use. If you're just looking for the polished pipes, this is a pretty good deal.
Here is a picture of them installed in a home-made intake setup (heat-shield + two filters):
Also, here is a picture of them installed with the M2 airbox on my previous FD:
So, any one have 1st hand experience with the pulley kit or the down-pipe kit?
#3
Derwin
iTrader: (2)
Join Date: Apr 2005
Location: MTL, QC
Posts: 2,888
Likes: 0
Received 0 Likes
on
0 Posts
The pulleys are supposed to be the same only reason I would buy them is if I didn't want the Greddy blue. I think Ebay is like Walmart slowly killing world economies.
The downpipe some people have en fit great other peoples don't fit at all.
I was actually looking at ebay and I saw this 29.99$ bumper on there and reading the description I found it kind of funny.
"We are a skilled knowledgeable exporter of The Bay Speed Body kit, and with near 10 years experience in business, we have grown into a high efficient team"
two lines later
"* Over 10Years of combined experience in the aftermarket automotive industry. " Well which one is it do you have less than or more than 10 years experience?
Also they show that obviously they aren't making the bodykit, so how does it cost 30$ to have something made in China shipped here and make a profit on it?
I hate ebay just hate it, although ShineAuto is also found on eBay....
The downpipe some people have en fit great other peoples don't fit at all.
I was actually looking at ebay and I saw this 29.99$ bumper on there and reading the description I found it kind of funny.
"We are a skilled knowledgeable exporter of The Bay Speed Body kit, and with near 10 years experience in business, we have grown into a high efficient team"
two lines later
"* Over 10Years of combined experience in the aftermarket automotive industry. " Well which one is it do you have less than or more than 10 years experience?
Also they show that obviously they aren't making the bodykit, so how does it cost 30$ to have something made in China shipped here and make a profit on it?
I hate ebay just hate it, although ShineAuto is also found on eBay....
#4
needs more track time
iTrader: (16)
Buyer beware on ebay vendor fabricated parts. Most of them are of poor quality - both materials and fitment.
Those intake pipes will not fit any air box. I tried on both the stock and M2 airbox. All of the board vendors that sell the hard intake pipes have the same fitment issue on the primary turbo inlet.
Those intake pipes will not fit any air box. I tried on both the stock and M2 airbox. All of the board vendors that sell the hard intake pipes have the same fitment issue on the primary turbo inlet.
#5
RX-7 Bad Ass
iTrader: (55)
With the Ebay stuff, you get what you pay for. Simple parts are usually OK, but more complicated parts are a definite no-no.
Ebay downpipes and midpipes may or may not fit well - they're totally pot luck. Believe it or not, there's a LOT of precision required for a good fit on exhaust parts, and it's easy to get the angle of a flange off a few degrees which screws up the whole fit of the system. A cheapie Ebay midpipe I got for experimentation cocked the exhaust upwards, making the cat-back bump the subframe while driving.
The intake pipes are also pot luck - I got a set once that was SUPER thin, they bent way easily. The couplers, as stated, are bigtime garbage. That's partially what prompted me to work with Fighter's Garage to develop an intake - it's thick-wall aluminum piping, bead rolled ends, quality couplers, etc.
I have no experience with the pullies. I can see fit being an issue if they're off one way or the other, though. I don't think I'd trust them.
Dale
Ebay downpipes and midpipes may or may not fit well - they're totally pot luck. Believe it or not, there's a LOT of precision required for a good fit on exhaust parts, and it's easy to get the angle of a flange off a few degrees which screws up the whole fit of the system. A cheapie Ebay midpipe I got for experimentation cocked the exhaust upwards, making the cat-back bump the subframe while driving.
The intake pipes are also pot luck - I got a set once that was SUPER thin, they bent way easily. The couplers, as stated, are bigtime garbage. That's partially what prompted me to work with Fighter's Garage to develop an intake - it's thick-wall aluminum piping, bead rolled ends, quality couplers, etc.
I have no experience with the pullies. I can see fit being an issue if they're off one way or the other, though. I don't think I'd trust them.
Dale
#7
Originally Posted by CosmoRx
Im running the pulleys, fit/work great.
Originally Posted by gracer7-rx7
Those intake pipes will not fit any air box. I tried on both the stock and M2 airbox. All of the board vendors that sell the hard intake pipes have the same fitment issue on the primary turbo inlet.
M2 airbox WITH eBay Bomz intake pipes:
Trending Topics
#9
registered user
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
The downpipe I got from ebay is good quality materials and welding wise. The turbo to downpipe flange is good and the curves are good, but other than the turbo to downpipe flange all of the other flanges are warped. If you going to cut the downpipe up to add HF cats than the ebay downpipe is a good choice, otherwise its not.
#10
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
I have that pulley kit. 31" belt won't work (tha'ts what Pettit has pictured with their kit). 30" should work but haven't tried it yet. I am using a 29" Gates belt (28 & 3/4") with stock sized pulleys and just short enough. With a true size you might be able to fit 28" but having to remove the alt pulley to mount it. Haven't tried it yet.
#11
Senior Member
Join Date: Apr 2006
Location: Brooklyn New York
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
I have that pulley kist as well. Actually rx7.com sells them. I went to order my Greddy ones and The man himself Ari told me they were identical. Weight and looks wise except these just dont have the Greddy name. So i bought these because they were way cheaper then the Greddy ones.
#15
back from the dead:
i just found this write up on Regan Rotary Racing:
http://www.negative-camber.org/crispyrx7/pulleys.htm
he installed the $25 eBay pulley kit and loves it:
i was just about to order the greddy kit when i saw this. i picked up a set of the same pulleys with a belt for $65 shipped - half the price of the greddy kit.
i'll be removing my air-pump, installing these, and the efini Y pipe next week.
now, what about the eBay short shifters? i had a B&M short shifter in the past - the ebay short shifters look exactly the same. not exactly a power adder...but i do like the shorter throw better for driving.
anyone have an ebay short throw? thoughts on that?
i just found this write up on Regan Rotary Racing:
http://www.negative-camber.org/crispyrx7/pulleys.htm
he installed the $25 eBay pulley kit and loves it:
i was just about to order the greddy kit when i saw this. i picked up a set of the same pulleys with a belt for $65 shipped - half the price of the greddy kit.
i'll be removing my air-pump, installing these, and the efini Y pipe next week.
now, what about the eBay short shifters? i had a B&M short shifter in the past - the ebay short shifters look exactly the same. not exactly a power adder...but i do like the shorter throw better for driving.
anyone have an ebay short throw? thoughts on that?
#17
Originally Posted by GoRacer
^ what brand belt and size (part #) did your kit come with?
the one i bought says:
This is a Brand New Light Weight Silver Color Aluminum 2 Pcs Pulley set Include With New Replacement Belt included *** Less then 1 Lbs *** Fits All Mazda RX-7 FD3S 93-95 *** Eliminate Factory Smog Pump ***
#19
i've heard some people complain about the shifter rattling and then others say theres has never made any noise since they purchased it.
it is def shorter throw.
so if you buy cheap you get what you get some good some close.
it is def shorter throw.
so if you buy cheap you get what you get some good some close.
#20
Please somebody help!!!
iTrader: (1)
Join Date: Sep 2005
Location: Woodridge, IL
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
There's a wealth of information on shifter rattle. On some cars it can't be avoided. One of the big rotary players did a test with several cars, some rattled some didn't.
#21
Ferrari Red Hotness
Join Date: Nov 2005
Location: Las Vegas
Posts: 964
Likes: 0
Received 0 Likes
on
0 Posts
It's kind of funny you posted those items, because I'm running pretty much all of them on my FD right now.
I have the pulley kit (I didn't install the alternator pulley, just the water pump) and the downpipe, and I also have the intake pipes with aftermarket filters. All of them fit just fine.
The downpipe is a tight fit, but it DOES fit. You just have to be creative to get it in and out with the engine in the car.
Good luck
I have the pulley kit (I didn't install the alternator pulley, just the water pump) and the downpipe, and I also have the intake pipes with aftermarket filters. All of them fit just fine.
The downpipe is a tight fit, but it DOES fit. You just have to be creative to get it in and out with the engine in the car.
Good luck
#22
Original Gangster/Rotary!
iTrader: (213)
I wouldn't run them.....in my experience, they rattle, the shifter has some play, and they don't go into gear in a positive manner. The B&M is a much nicer quality piece----you'll know where the extra money went, that's for sure.
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM