3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Vacuum issue?

Thread Tools
 
Search this Thread
 
Old Aug 20, 2004 | 10:12 AM
  #1  
gbomb91's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
iTrader: (1)
 
Joined: Jun 2002
Posts: 57
Likes: 0
From: cumming, ga
Vacuum issue?

Yesterday I had my PFC tuned and I'm noticing something odd now. I have full boost and the runs great but at idle it seems to hunt a little when I get off the gas, until it warms up. I also notice I'm only at 14hg@ idle instead og the 15-16 I was used to. One more thing I noticed is that now, the fans and the light s do not change the idle where as before it would go up as you turned these on, and finally during the tuning I did blow a vacuum line which we found and zip tied in place. I know it isn't this hose but are these signs of another hose possibly off or anything else? One more thing, on the datalogit the tuner had my idle set at 720 but it was accutually reading 800, does this point to anything?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
Frisky Arab
2nd Generation Specific (1986-1992)
5
Sep 4, 2015 06:17 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 02:42 PM.