Vac hose job
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Hawaii
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Vac hose job
I've started teh VAc hose job and i have no clue how to remove the solenoid rack from the car.... i've disconnected most of the vac hoses yet the rack seems still stuck to the car... does anyoen have any details about how the rack is attached to the car?
#2
Rotary Enthusiast
There are screws holding it on, cant remember if its 2 or 4, but they are all on either end of the rack. One end faces the front of the car, the other faces the rear. BE VARY careful as the screws strip VERY easily. With the ones in the rear, you will probably need a ratchet to get them out.
#5
Junior Member
Join Date: May 2002
Location: Arlington, VA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
and
https://www.rx7club.com/forum/showth...hreadid=138077
see pics attached to post at the bottom of the first page and top of second page.
https://www.rx7club.com/forum/showth...hreadid=138077
see pics attached to post at the bottom of the first page and top of second page.