v mount radiators
#1
Senior Member
Thread Starter
Join Date: Oct 2005
Location: new zealand
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
v mount radiators
ok im doing a v mount, and ive being reading and reading but theres not much on the radiators, so what i want to know is there anything i need to know or can i just use any radiator that would fit.
im going single and will be geting the apexi v mount intercooler.
thanks
it will look like this
im going single and will be geting the apexi v mount intercooler.
thanks
it will look like this
#4
a dual pass radiator would be best so you dont have a problem routing your outlet hose around your fans and also you will have more clearance from the floor.
https://www.rx7club.com/showthread.p...hlight=v-mount
https://www.rx7club.com/showthread.p...hlight=v-mount
#5
Senior Member
Thread Starter
Join Date: Oct 2005
Location: new zealand
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
ok this is the rad i was going to get. at first i was going to go front mount but have ghange my mind and want to do this. so would this rad fit? and i do think its a apexi, they dont make them anymore, its about $350nz ($170us)
hows it going man had a chance to price the radiator up 2day
to build the alloy radiator with a 57mm core is $880inc gst
and 40mm core is $860inc gst (nz dollars) about $550us
the koyo radiator is 53mm thick I dont know what kinda extra room there is
in the batman for a thicker rad.. the tanks will be around 77~80mm thickness
so just dep if there is room
cheers dude
frm mark
RDR.
I whould be interested in seeing the pic's
if keen send them to custom@rdradiators.co.nz
thx
thanks four your replys
hows it going man had a chance to price the radiator up 2day
to build the alloy radiator with a 57mm core is $880inc gst
and 40mm core is $860inc gst (nz dollars) about $550us
the koyo radiator is 53mm thick I dont know what kinda extra room there is
in the batman for a thicker rad.. the tanks will be around 77~80mm thickness
so just dep if there is room
cheers dude
frm mark
RDR.
I whould be interested in seeing the pic's
if keen send them to custom@rdradiators.co.nz
thx
thanks four your replys