v mount radiators
 

ok im doing a v mount, and ive being reading and reading but theres not much on the radiators, so what i want to know is there anything i need to know or can i just use any radiator that would fit.

im going single and will be geting the apexi v mount intercooler.

thanks

it will look like this

Any radiator should work fine.

i think thats just an apexi sticker stuck on that IC...i could be wrong?

a dual pass radiator would be best so you dont have a problem routing your outlet hose around your fans and also you will have more clearance from the floor.
https://www.rx7club.com/showthread.p...hlight=v-mount

ok this is the rad i was going to get. at first i was going to go front mount but have ghange my mind and want to do this. so would this rad fit? and i do think its a apexi, they dont make them anymore, its about $350nz ($170us)

hows it going man had a chance to price the radiator up 2day
to build the alloy radiator with a 57mm core is $880inc gst
and 40mm core is $860inc gst (nz dollars) about $550us

the koyo radiator is 53mm thick I dont know what kinda extra room there is
in the batman for a thicker rad.. the tanks will be around 77~80mm thickness

so just dep if there is room

cheers dude
frm mark
RDR.

I whould be interested in seeing the pic's
if keen send them to custom@rdradiators.co.nz
thx

thanks four your replys

That's what I was thinking. I don't think Apexi makes/sells a V-mount IC

where are the pics?

The only vmounts apexi made was for their D1 car, and calvin wans drift car. Even the red FD he slammed into the wall in 2004. HAHA!

i saw that up close that thing was messed up.