urgent need of wiring diagram
#6
Full Member
Thread Starter
Join Date: Feb 2007
Location: Pakistan
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Senior Member
Join Date: Apr 2004
Location: Sydney Australia
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
If you bought the 1999 engine complete as a front cut it should include all the front, dash, engine harness and its a simple case of swapping it in which means you'll have to take out your dash, front fenders etc.
If you have the engine ONLY then there your main problems is getting the engine harness to plug into 94 FD ECU, which I already assume you know will not fit.
Having said this I do know 1 other person who has successfully put a 1999+ engine into a 93-95 FD without changing a single wire. If interested I can find his details for you.
#10
Full Member
Thread Starter
Join Date: Feb 2007
Location: Pakistan
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Yeah well I've done a similar conversion only with a 1997 13b Engine into a 1994 FD.
If you bought the 1999 engine complete as a front cut it should include all the front, dash, engine harness and its a simple case of swapping it in which means you'll have to take out your dash, front fenders etc.
If you have the engine ONLY then there your main problems is getting the engine harness to plug into 94 FD ECU, which I already assume you know will not fit.
Having said this I do know 1 other person who has successfully put a 1999+ engine into a 93-95 FD without changing a single wire. If interested I can find his details for you.
If you bought the 1999 engine complete as a front cut it should include all the front, dash, engine harness and its a simple case of swapping it in which means you'll have to take out your dash, front fenders etc.
If you have the engine ONLY then there your main problems is getting the engine harness to plug into 94 FD ECU, which I already assume you know will not fit.
Having said this I do know 1 other person who has successfully put a 1999+ engine into a 93-95 FD without changing a single wire. If interested I can find his details for you.
The Problem is have to prepare the same slashed wiring till ECU but dont know what wire goes to what connecter at ECU.
The motor is now swapped and the every sensor is at its place but the wiring is in bad shape.
I dont know how your friend completed OBD1 wiring for OBDII ECU. ... and im interested for sure.
#12
Stand by for a few....................
The 1993 - 1995 ECU diagram may be of some help, but you probably have one...
#13
#14
Thread
Thread Starter
Forum
Replies
Last Post
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM