3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Upgrade questions

Thread Tools
 
Search this Thread
 
Old Aug 1, 2006 | 02:31 PM
  #1  
FD'up's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 83
Likes: 0
From: GA
Upgrade questions

Here are the mods I have right now:
Bonez Downpipe
High flow Cat
Racing Beat exhaust
manual boost controller
boost gauge
water temp gauge
pettit air intake

coming in:
fluidyne radiator

I am currecntly looking at buy a apexi PFC + commander and the FC datalogit. Now I was wondering if I should install anything before I buy these items(such as bigger injectors, fuel pump, anything!!!!). I am open to all suggestions because right now I am very hesitant in buying these. I just want to make sure I am going in the right direction. I really need your guys help! Thanks
Reply
Old Aug 1, 2006 | 05:56 PM
  #2  
FD'up's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 83
Likes: 0
From: GA
does anyone have any info?
Reply
Old Aug 1, 2006 | 06:03 PM
  #3  
Sled Driver's Avatar
The Anti-Prius
Tenured Member 20 Years
iTrader: (9)
 
Joined: Feb 2001
Posts: 1,107
Likes: 3
From: Federal Way, WA
I think this might be the wrong forum to ask.

Most of us limit our "mods" to those pine air freshner trees hanging from the rear view mirror.

The more radical people will invest in the "triple edge" wiper blades.


I've heard good things about the "Turbonator Tornado Vortex Flux Capacitor"


Good luck......................
Reply
Old Aug 1, 2006 | 06:12 PM
  #4  
EZFD's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Jul 2005
Posts: 520
Likes: 0
From: Lancaster, NY
if you are at this stage, go with 850's for primary injectors, a supra TT fuel pump and a better SMIC. Then you can also consider staying sequential or not with the turbos. Just my $0.02.
Reply
Old Aug 1, 2006 | 09:59 PM
  #5  
FD'up's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 83
Likes: 0
From: GA
thanks for your feedback EXFD. I seached through and found that as long as I run on 10psi of boost I can run a fuel pump with stock injectors. I went ahead and bought the walbaro pump, Power FC+commander. If anyone else has some suggestions that would be awesome, thanks for all your help.
Reply
Old Aug 2, 2006 | 12:09 AM
  #6  
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 1,083
Likes: 4
From: california
If your only going to run 10 psi your stock fuel pump, injectors, and ECU will be just fine. if your going to up the boost then the above upgrades and tuning come into play.
Jeff
Reply
Old Aug 3, 2006 | 11:35 AM
  #7  
FD'up's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2006
Posts: 83
Likes: 0
From: GA
I am going to keep it at 10 until I upgrade my intercooler, which might be awhile. What intercooler would you guys recommend. I just bought a fluidyne radiator, so is a FMIC out of the picture? Or can I still fit one in?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
SCinfidel
3rd Generation Specific (1993-2002)
4
Sep 8, 2015 05:36 PM
dillrx7
Single Turbo RX-7's
3
Sep 7, 2015 09:38 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 06:29 AM.