FyVe

iTrader: (1)

Can anyone post me pics of their undertrays if you have a 99+ front end?
I'm interested in this undertray from corksport 99 SPEC MAZDA (J-SPEC) RX7 Under Tray but I'm not sure if it'll fit my replica 99 bumper. The bumper has all the holes drilled on the bottom, but I don't have a front lip. I hope assembly requires it to be installed between the bumper and where a lip would go, but I'm not sure with all the mixed information out there.
Also, if anyone has a 93-95 undertray WITH that 99+ bumper I'd like to see that also - supposedly it fits but there's a gap to the front bumper. I'd probably consider going this route if the fitment on the 99+ is questionable and the gap isn't unbearable or too odd looking.
Thanks!

ptrhahn

iTrader: (9)

It's pretty much the same as the 93/95 except it doesn't have that little sub tray that mates the shape of the 93/95 nose to the radiator. I just used the 93/95 undertray and cut that thing off when I switched to an aftermarket '99 nose.

DMoneyRX-7

iTrader: (2)

A 99 spec tray will fit your replica.

I'd just go with the Shineauto undertray. Fits 99 spec so it should fit your replica.


FD3S RX-7 Misc. Items | Shine Auto Project

FyVe

iTrader: (1)

Well this is what I'm worried about. Post #3 on https://www.rx7club.com/3rd-generati...ot-fit-896377/ that thread, the pic looks like it is installed under the lip. I don't have a lip on my 99' bumper. Anyone reading this have a shine undertray on a 99 without the lip?

FyVe

iTrader: (1)

Do you have a pic of the piece you cut off? Or can you just use ms paint to circle the part on a normal undertray? I don't have a stock undertray for reference. How clean did the cut look? Or was it well hidden?1

mcon

iTrader: (2)

I like the bit that sticks up for some reason so I just left it on my car. Hope it helps.

rlee429

iTrader: (25)

My shineauto undertray fits slightly about the lip, had to be creative with the mounting points

FyVe

iTrader: (1)

Rlee can you show me a pic of it from the bottom and front like mcon just posted? Curious now. How hard was it to mount? Do the holes not just line up with the car's normal mounting spots for the oem undertray? That's something else I'm a bit worried about.