Uh oh... coolant spillage out the overflow tank
#1
Rotary Freak
Thread Starter
Uh oh... coolant spillage out the overflow tank
I hope this is something minor. I just removed and replaced the UIM/TB. I took it off to chase down a loose connection to my AIS.
Now, after I put everything back together, I am seeing coolant **** out the over flow tank after I ran the car a while. I'm hoping that this is somewhat normal... I did have the TB coolant line disconnected while I was removing the UIM/TB. Air must have gotten into the system.
Can someone confirm this for me. Do I just have to burp the system?
Now, after I put everything back together, I am seeing coolant **** out the over flow tank after I ran the car a while. I'm hoping that this is somewhat normal... I did have the TB coolant line disconnected while I was removing the UIM/TB. Air must have gotten into the system.
Can someone confirm this for me. Do I just have to burp the system?
#2
BOOOYAHHHH!
might have been an airbubble that escaped pushing coolant out with it. i wouldnt worry about it unless it keeps doing it.. But definetly burp the system and make sure coolant is topped of.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM