I hope this is something minor. I just removed and replaced the UIM/TB. I took it off to chase down a loose connection to my AIS.

Now, after I put everything back together, I am seeing coolant **** out the over flow tank after I ran the car a while. I'm hoping that this is somewhat normal... I did have the TB coolant line disconnected while I was removing the UIM/TB. Air must have gotten into the system.

Can someone confirm this for me. Do I just have to burp the system?

 

might have been an airbubble that escaped pushing coolant out with it. i wouldnt worry about it unless it keeps doing it.. But definetly burp the system and make sure coolant is topped of.

 

That is not a problem, did you run the car when filling the radiator, becuase that helps get the bubbles out. OK

 

Could also be a leaky pressure cap, if it still happens once you've bled all the air out.

jds

 

that happend with my car....now i dont drive it...cause its hard to start sometimes and when it does...haha looks like my driveway is on fire

 

best of luck to you tho. hopefully its an air bubble.

 

Yup, I need to burp the sucker. The motor only has 8k miles on it.