CareBear

I have two extra electrical connectors that I'm unsure where should go. The first one is inside the car where the ECU is.

See the black connection that is on the same harness as the ECU connectors. Where should this go? Should I leave it like that?



Here we have a white connector that is in the engine bay. My car is a japanese model so this is the side with the downpipe and steering wheel. Any idea what it should be connected too? I'm not sure, but I think it was unused even before I started removing the engine.

foreignracer

iTrader: (2)

The first one is supposed to go to a small black control box that I do not see in the pic. I am not sure by looking at the pic where the other one goes.

CareBear

Do you know what the black control box does? Is it possible that it is no longer used on my car and I can drop connecting it? Not sure if I remember correctly, but I think it was unused when I remove the original ECU.

goz

mine s a jap too..did notice an unused block conector by the ecu , ill check to see if its the same one..ill have a look for the white downpipe one while im at it ...

vrmmmpshhh

the second one looks like wiring for a boost controller. follow it and see where it leads to.

foreignracer

iTrader: (2)

I am not sure what the control box does......I was just in there last night thats why I know where it goes. It might not be used in the JDM cars, I am unsure about this

KBSRX7

I think its for V-TECH! HA HA . No seriously I think it does go to that "black box"

Mahjik

iTrader: (1)

IIRC, that should go to the fan control box. I'm not sure if that was ever a recall for the Euro models or not. Obviously, if you don't have the black fan control box, then you can't plug it in.