turbo oil/water feed line help.
#1
I'm on a Boat!
Thread Starter
iTrader: (15)
Join Date: May 2003
Location: OK
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
turbo oil/water feed line help ***pix***
I already posted this in the single turbo section but i'm looking for help anywhere i can get it.
Ok guys here is my problem. I just received my garrett to4R turbo from rx7store.net and there is a problem with the turbo oil/water feed fittings.
I need to know exactly what size the fittings are from the turbo oil feed line and the ports on the turbo it goes to. They are both female connection. but i didn't receive the fitting(s) that go in between it.
They also gave me the banjo bolt and fitting for the water feed/return line. but they are too small for the openig on the turbo. I need to know what size the wholes are on the turbo. I am quessing about a 16mm because i took the banjo bolt to autozone and they said it was a 14mm x 1.25 or 1.5(something like that.)
If anyone could tell me where i could find the banjo bolts and fittings for the things i need it would help a lot.
Thanx in advance,
Cyan
Ok guys here is my problem. I just received my garrett to4R turbo from rx7store.net and there is a problem with the turbo oil/water feed fittings.
I need to know exactly what size the fittings are from the turbo oil feed line and the ports on the turbo it goes to. They are both female connection. but i didn't receive the fitting(s) that go in between it.
They also gave me the banjo bolt and fitting for the water feed/return line. but they are too small for the openig on the turbo. I need to know what size the wholes are on the turbo. I am quessing about a 16mm because i took the banjo bolt to autozone and they said it was a 14mm x 1.25 or 1.5(something like that.)
If anyone could tell me where i could find the banjo bolts and fittings for the things i need it would help a lot.
Thanx in advance,
Cyan
Last edited by ProjectD; 04-15-06 at 08:08 PM.
#5
I'm on a Boat!
Thread Starter
iTrader: (15)
Join Date: May 2003
Location: OK
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
It's a to4r. And yes i'm in Oklahoma. But i'm in the tulsa area.
The guy that did the porting on my motor is in OKC. you may know him, his name is Brad. He has a MB FD and a red FC
The guy that did the porting on my motor is in OKC. you may know him, his name is Brad. He has a MB FD and a red FC