can someone point out to me which of the wires on the ecu connector belong to the turbo control and the precontrol solenoids?

paul

 

there are 2 solenoids that are attached to the UIM. They should be green. The connector is black. One will have a white dot on it. The other will not. The white dot is precontrol. The one without is boost control.

 

well, im looking for what those connectors translate to on the ecu. . . no matter. . . i already found it. . .
thanks anyways,
paul

 

I was going to say turbo control 1 was yellow with lavender stripe to pin 4R on ECU.

Turbo control 2 is the same

Precontrol is lavender with yellow stripe to pin 4V on ECU

I guess you already know this.

Adam

 

oops, my bad Paul

 

haha, yeah. i found out why my powerfc boost control kit wasnt working. . . i cut the precontrol wire out and took it COMPLETELY out of the harness. i was using the wastegate wire to try to control and it just wasnt doing anything. . . solenoid wouldnt even click when turned on. so i think all i have to do is swap the pins on the ecu's harness connector.

thanks anyways

paul

 

Paul. Your SUPPOSED to use the wastegate wire to run your wastegate!

Hit me up on AIM dude...