turbo control/precontrol wires???
can someone point out to me which of the wires on the ecu connector belong to the turbo control and the precontrol solenoids?
paul |
there are 2 solenoids that are attached to the UIM. They should be green. The connector is black. One will have a white dot on it. The other will not. The white dot is precontrol. The one without is boost control.
|
well, im looking for what those connectors translate to on the ecu. . . no matter. . . i already found it. . . :D
thanks anyways, paul |
I was going to say turbo control 1 was yellow with lavender stripe to pin 4R on ECU.
Turbo control 2 is the same Precontrol is lavender with yellow stripe to pin 4V on ECU I guess you already know this. Adam |
oops, my bad Paul :D
|
haha, yeah. i found out why my powerfc boost control kit wasnt working. . . i cut the precontrol wire out and took it COMPLETELY out of the harness. i was using the wastegate wire to try to control and it just wasnt doing anything. . . solenoid wouldnt even click when turned on. so i think all i have to do is swap the pins on the ecu's harness connector.
thanks anyways:D paul |
Paul. Your SUPPOSED to use the wastegate wire to run your wastegate!
Hit me up on AIM dude... |
All times are GMT -5. The time now is 06:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands