troubleshooting oil in the turbos...
03-08-05, 10:30 AM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Feb 2004
Location: Seymour, TN (couple miles west of the atlantic ocean)
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
troubleshooting oil in the turbos...
im about to by an FD, and the only problem is it goes through turbos like none other. and whenever they pull them they're filled with oil. where do i start on troubleshooting this?...
03-08-05, 03:57 PM
#5
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Check the PCV valve it could be stuck closed, therefore to much crankase pressure is crated, so high oil pressure is sent to turbos more than they can flow.
I had that problem a while ago, lotta smoke since most of the oil went to exhaust, solved it w/a new PCV valve.
I had that problem a while ago, lotta smoke since most of the oil went to exhaust, solved it w/a new PCV valve.
Last edited by TwinTurbo93; 03-08-05 at 03:59 PM.
03-08-05, 04:32 PM
#6
Banned. I got OWNED!!!
Thread Starter
Join Date: Feb 2004
Location: Seymour, TN (couple miles west of the atlantic ocean)
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mwpayne
Just remember the rule:
NO NON-ROTARY OIL STAINS ALLOWED IN MY DRIVEWAY!
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM