Tried the suck up water into manifold trick...
#1
Avoiding the tree lane
Thread Starter
Join Date: Mar 2005
Location: Grand Rapids, MI
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Tried the suck up water into manifold trick...
Filled a 2 litre with water, got some hose, unplugged the vac connection at the UIM for the purge valve solenoid, revved it up and dropped the hose in... took a few minutes of high revving and bogging to get it all through, didn't see anything come out the back end and i'm not sure if it made any difference or not, oh well worth the effort eh?
#4
Avoiding the tree lane
Thread Starter
Join Date: Mar 2005
Location: Grand Rapids, MI
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
supposedly it's the best method to clean the carbon out of the engine (think steam cleaning, water introduced to fast moving engine with hot combustion temps)
took about 3-4 minutes to ingest it all
took about 3-4 minutes to ingest it all
Trending Topics
#9
2/4 wheel cornering fiend
Just FYI: using water (steam vapor) to clean out carbon deposits in the combustion chamber will take a lot longer than "revving the car for a few minutes".
#10
2/4 wheel cornering fiend
Originally Posted by Julian
that much sounds crazy. water is incompressible, thus water in chamber increases compression ratio by that amount.. and steam just raises pressures more.
EDIT: I do think that the practice of simply feeding water into the intake tract via vacuum to "clean out the engine" is a waste of time.
Last edited by Kento; 06-23-05 at 03:09 PM.
#11
Avoiding the tree lane
Thread Starter
Join Date: Mar 2005
Location: Grand Rapids, MI
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kento
As long as there is still combustion taking place, there isn't near enough water present in the combustion chamber to have any effect on the compression ratio. Same for the "steam raising pressures"; there isn't near enough being produced to have any effect.
EDIT: I do think that the practice of simply feeding water into the intake tract via vacuum to "clean out the engine" is a waste of time.
EDIT: I do think that the practice of simply feeding water into the intake tract via vacuum to "clean out the engine" is a waste of time.
#12
Lets Go Hokies!
iTrader: (5)
Originally Posted by BoostFrenzy
everyone seems to agree it's safe
Yeah, I have never heard of anything breaking from sucking water into the engine, but some are afraid of a large carbon chunk breaking off and damaging the turbos.
Personally I just make sure to redline the engine everytime I take it out. It sure is the most fun way to clean carbon from your engine.
#15
BOOOYAHHHH!
Originally Posted by afterburn27
Yeah, I have never heard of anything breaking from sucking water into the engine, but some are afraid of a large carbon chunk breaking off and damaging the turbos.
Personally I just make sure to redline the engine everytime I take it out. It sure is the most fun way to clean carbon from your engine.
Personally I just make sure to redline the engine everytime I take it out. It sure is the most fun way to clean carbon from your engine.
#18
Lives on the Forum
Letting the engine inhale water through a vacuum line is not going to cause hydraulic lock for the simple fact that is would be impossible for the engine to ingest an amount of water large enough to completely fill the chamber. If you have a running engine and submerge the entire inlet then you're looking for trouble, but letting the engine suck water through a 1/4" or so hose is not going to cause it to lock. Impossible.
#19
BOOOYAHHHH!
Originally Posted by afterburn27
haha, when they say "a healthy gulp" they are talking about a lot more water than can be sucked through a small vacuum nipple like we are talking about here.
edit: Any specifics on how he did that?
edit: Any specifics on how he did that?
He was going off roading in a stream that was pretty damn deep.
#22
You can't compare piston engines to rotaries for this particular procedure. That is total apples-to-oranges comparison.
Rob Golden from Pineapple was the main tech speaker at Sevenstock last year. He talked about dumping a 2 liter bottle of water into your rotary while it running at around 4k RPM. I am personally scared to try this myself, but Rob is one of the most respected builders in the industry. Do you think he'd stand up at a rotary specific event in front of many rotor heads and tell them to do something that would kill their engines?
Sonny
Rob Golden from Pineapple was the main tech speaker at Sevenstock last year. He talked about dumping a 2 liter bottle of water into your rotary while it running at around 4k RPM. I am personally scared to try this myself, but Rob is one of the most respected builders in the industry. Do you think he'd stand up at a rotary specific event in front of many rotor heads and tell them to do something that would kill their engines?
Sonny
#23
BOOOYAHHHH!
I never once said how much it would take to destroy a rotary motor. Don't take what i posted out of context. And im not comparing Rotaries to Piston engines.. Don't start one of the debates. I was merly showing what water does to an engine based off of this statement.
But im not Rotary wizard but i dont see how it is physicaly possible for ANY motor to compress water and not suffer damage (enough water). Now i wasent there to hear Rob speak. Cans someone else chime in and explain how a motor can fill one of its combustion chambers compress it and not suffer damage?
"Yeah, I have never heard of anything breaking from sucking water into the engine, but some are afraid of a large carbon chunk breaking off and damaging the turbos."
Last edited by RX7Wishing; 06-23-05 at 05:24 PM.
#25
Read the top post on this page.
A rotary won't run on broken apex seals.
Sonny
Originally Posted by RX7Wishing
Tell this guy water never hurts anything. Now, on a rotary motor you would be looking out broken apex seals more then likely.
Sonny