For those of you shooting BIG FLAMES!!
Seven Spears of Shizugata
Joined: Dec 2001
Posts: 243
Likes: 0
From: CALGARY ALBERTA CANADA
I am pretty sure any Jonny Lunchbucket with any welding experiance can do this. I could do it, if it were summer. As I only do my welding in the Summer (for me it's a outdoor thing). But any and I stress "DECENT" muffler shop should be able to do a satisfactory job. If you can't find anyone you will have to wait till summer
1JZ powered
Joined: Jul 2001
Posts: 4,423
Likes: 0
From: Where there's only two seasons, hot and wet! I love Okinawa
Re: Flame On, I'm Gone!
Originally posted by the_glass_man
Do you mean like this???
My solution, simple notice how my exhaust tip sits a lil further out than most aftermarket exhaust? There is a reason why I did it this way!
Do you mean like this???
My solution, simple notice how my exhaust tip sits a lil further out than most aftermarket exhaust? There is a reason why I did it this way!
my flames seem to be doing the same thing. I switched with my buddy's 180sx for a 2 mile run, an saw flames like that coming out of my exhaust...
...needless to say I was VERY pleased
Thread Starter
Lucky
Joined: Mar 2001
Posts: 818
Likes: 0
From: Dubuque, Iowa
Well I think I have decided to go to my muffler guy and have him make me a 5" piece somehow to make my muffler stick out far away from the car, I dont care how bad it looks, it can look as bad as my baby does now, it makes me cry looking at my bumper. I need to post pics, when I get my digital camera back. I might have the worst bumper out there, anyone want to compete, show pics!!!!
i still haven't seen any flame videos 
A capital FD barbie
Joined: Aug 2002
Posts: 195
Likes: 0
From: Paradise?
leave some gap b/w the bumper and the exhaust. And use aluminum plate cover under it. That's what I do... no burning or anything so far... or my flame is not big enough>> 
However, i hope that helps
However, i hope that helps
Rotary Freak
Joined: Jan 2002
Posts: 2,171
Likes: 1
From: Nashville Tn
SLIDE a longer pipe over the one you have and hold it on with weld,screws , pop rivit. clamp, what ever. polish it first or have it chromed or buy a chrome tube. How hard can this be for all you people that work on your own cars.
Rotary Enthusiast
Joined: Jun 2002
Posts: 1,447
Likes: 0
From: abingdon, maryland
how are you guys shooting flames. i don't think i am shooting any. i have cb/mp/dp/pfc @12.5 psi/greddy smic/intakes. maybe i am but how do you shoot it on command so i can look at it. thanks.
Rotary Enthusiast
Joined: Sep 2002
Posts: 1,284
Likes: 0
From: Fenton, MI
Originally posted by fd3virgin
how are you guys shooting flames. i don't think i am shooting any. i have cb/mp/dp/pfc @12.5 psi/greddy smic/intakes. maybe i am but how do you shoot it on command so i can look at it. thanks.
how are you guys shooting flames. i don't think i am shooting any. i have cb/mp/dp/pfc @12.5 psi/greddy smic/intakes. maybe i am but how do you shoot it on command so i can look at it. thanks.
PS - don't have them tailgate you. I love watching the look on people's faces in my rearview mirror when I pass them.
Originally posted by duboisr
SLIDE a longer pipe over the one you have and hold it on with weld,screws , pop rivit. clamp, what ever. polish it first or have it chromed or buy a chrome tube. How hard can this be for all you people that work on your own cars.
SLIDE a longer pipe over the one you have and hold it on with weld,screws , pop rivit. clamp, what ever. polish it first or have it chromed or buy a chrome tube. How hard can this be for all you people that work on your own cars.
Rotary Enthusiast
Joined: Jun 2002
Posts: 1,447
Likes: 0
From: abingdon, maryland
Originally posted by MichRX7
Chances are you are shooting flames. Ask one of your buddies to drive behind you on the freeway. Crank it up to 6-7000 rpm's and then let off the throttle.
PS - don't have them tailgate you. I love watching the look on people's faces in my rearview mirror when I pass them.
Chances are you are shooting flames. Ask one of your buddies to drive behind you on the freeway. Crank it up to 6-7000 rpm's and then let off the throttle.
PS - don't have them tailgate you. I love watching the look on people's faces in my rearview mirror when I pass them.
that way i can take a picture.
I don't know if it does it when you just rev but I can get it to do it by launching hard on the street and the tires break loose and the revs go up and then I shift into 2nd
Also getting traction through 1st and shifting hard/fast into 2nd will do it
fun times
Also getting traction through 1st and shifting hard/fast into 2nd will do it
fun times
Full Member
Joined: Oct 2002
Posts: 100
Likes: 0
From: Eugene Oregon
correct me if im wrong but are you all running the stock twins? i heard that with a dp mp and cb will produce flames when the stock waste gate is used because it cant handle the increased amount of gas. Im probably wrong but i would like to know.
Senior Member
Joined: Jul 2001
Posts: 451
Likes: 0
From: Binghamton, NY
hey Glassman, we need some more video of your car and maybe even mine before i sell it shooting flames. my dad said he saw a 2-4' flame the other day when he was behind me on the highway when i downshifted from 5th to 4th and slammed the gas. must of been nice. wish he was a little closer so i could of singded the front of their pretty grand cherokee
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
joel(PA)
Group Buy & Product Dev. FD RX-7
8
Oct 4, 2015 06:07 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
8
Oct 2, 2015 08:08 AM