For those w/ FMIC and a P/S cooling line...
#1
I Sold My Car 2 the Devil
Thread Starter
Join Date: Oct 2001
Location: Duncanville, Tx
Posts: 2,361
Likes: 0
Received 0 Likes
on
0 Posts
For those w/ FMIC and a P/S cooling line...
I'm trying to get an idea for the p/s cooling line. I have the setup where the radiator leans top forward towards the FMIC w/ a condensor under it laying flat. the P/S cooling line hangs down now because I have put 2 electric fans on the condenser to help it cool more efficently. To help you picture it if you layed down infront of the car and looked under it you can actually notice that that line sits lower than the front R1 lip by about 1 inch. I am trying to find a way to redo the metal line so it circles around the condensor or something of that nature... kinda hard to put in words but does anyone have any ideas?
TIA,
Ryker
TIA,
Ryker
#2
Eats, Sleeps, Dreams Rotary
Re: For those w/ FMIC and a P/S cooling line...
Originally posted by wonder1and
I'm trying to get an idea for the p/s cooling line. I have the setup where the radiator leans top forward towards the FMIC w/ a condensor under it laying flat. the P/S cooling line hangs down now because I have put 2 electric fans on the condenser to help it cool more efficently. To help you picture it if you layed down infront of the car and looked under it you can actually notice that that line sits lower than the front R1 lip by about 1 inch. I am trying to find a way to redo the metal line so it circles around the condensor or something of that nature... kinda hard to put in words but does anyone have any ideas?
TIA,
Ryker
I'm trying to get an idea for the p/s cooling line. I have the setup where the radiator leans top forward towards the FMIC w/ a condensor under it laying flat. the P/S cooling line hangs down now because I have put 2 electric fans on the condenser to help it cool more efficently. To help you picture it if you layed down infront of the car and looked under it you can actually notice that that line sits lower than the front R1 lip by about 1 inch. I am trying to find a way to redo the metal line so it circles around the condensor or something of that nature... kinda hard to put in words but does anyone have any ideas?
TIA,
Ryker
#3
Waiting for the RX-9
Join Date: Mar 2003
Location: Texas
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
PS Cooler w/FMIC
I used the Greddy tube and I bought a little Perma-Cool single loop PS fluid cooler and mounted it under the crossrail behind the cooling fans. I dont know it its any better than stock, but it looks cool.
Either one is actually probably enough for anything short of autocross.
Either one is actually probably enough for anything short of autocross.
#4
I Sold My Car 2 the Devil
Thread Starter
Join Date: Oct 2001
Location: Duncanville, Tx
Posts: 2,361
Likes: 0
Received 0 Likes
on
0 Posts
I think what I will do is get one of those coolers and mount it up near where my 2nd oil cooler should be. that should help.
Thanks guys,
Ryker
Thanks guys,
Ryker
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM