3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

thermoswitch pic request

Old 04-22-09, 01:10 AM
  #1  
Living the Dream

Thread Starter
iTrader: (1)
 
ManGaZeRo's Avatar
 
Join Date: Apr 2003
Location: Temple city, CA
Posts: 1,342
Likes: 0
Received 0 Likes on 0 Posts
thermoswitch pic request

About to perform the fc thermoswitch replacement, wondering if anyone can provide a picture of where it is located. I know you have to remove the crossover ic pipe and alternator, just wanted a solid point to look at, before I getting down and dirty.
Old 04-22-09, 07:06 AM
  #2  
Urban Combat Vet

iTrader: (16)
 
Sgtblue's Avatar
 
Join Date: Oct 2003
Location: Mid-west
Posts: 12,030
Received 879 Likes on 619 Posts
This is the best I can do. IIRC, the thermoswitch is just below the green thermosensor connector you can just see behind the WP housing. I think when I replaced mine in the car, I found it was easier to remove/replace the upper sensor to get it out of the way...but YRMV.
Old 04-22-09, 10:01 AM
  #3  
Rotary Enthusiast

iTrader: (4)
 
DriftDreamzSS's Avatar
 
Join Date: Apr 2006
Location: Ventura
Posts: 1,236
Likes: 0
Received 3 Likes on 3 Posts
I just had mine out yesterday, no need to remove the alternator. Just unplug the wiring and a 17mm deep socket fits over the sensor and you can remove it. It's the black plug with black and red single wire underneath the green plug.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:51 PM.