3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Sun-Hyper Ground System- Install

Old Nov 30, 2002 | 02:23 PM
  #1  
arie1955's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 71
Likes: 0
From: NY, NY
Sun-Hyper Ground System- Install

Hello, I have a 93 TT with the basic mods (Intake, downpipe, catback, midpipe, smic, and PFC). Ever since i got the car, the thing bucks when your in like 2nd or 3rd gear, and like 3,000 RPM. It is just annoying me, and i have played with the TPS, and a few other things. After speaking to Chris at RX7.com, he suggested the Hyper Ground System. I bought it, but not too sure where and how to install it. Have any of you guys installed this item, and if so, can you outline it to me. I hate to take this to a mechanice who would be puzzled just as me. Also, do i take off the entire Stock ground system?

Any help would be greatly appreciated
Reply
Old Nov 30, 2002 | 03:01 PM
  #2  
actionhank's Avatar
Full Member
Tenured Member 05 Years
 
Joined: May 2002
Posts: 188
Likes: 0
From: Corvallis OR
Im doing that right now too. i think all there is to it is finding your stock grounds then taking the wires you get from them and kinda play connect the dots from point to point untill you get to your battery.

the only problem i am having is that i cant find my stock grounds..... I found one by the oil tank next to the spark plugs, but other than that, I cant find any of them.

Any sugestions or comments?
Reply
Old Nov 30, 2002 | 03:30 PM
  #3  
xstacy7's Avatar
I love when things work
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: Nashville, TN
look on the driver's side wiring harness, there should be a ground mounted to the bay under all the fuses, there should be another on the alternator, there are a couple more, but you just have to look for them
Reply
Old Nov 30, 2002 | 05:01 PM
  #4  
legendr36's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 56
Likes: 0
From: cali
You may want to check your O2 sensor. I had bad bucking problems during low RPMs and I found out that my O2 sensor needed to be replaced.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Snook
3rd Generation Specific (1993-2002)
14
Oct 1, 2015 10:56 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:28 PM.